Manufacturers
TDK-LAMBDA CPFE500F-12-DLC
Description
504 W, Single Output, 12 VDC@42 A AC-DC Power Supply
Part Number
CPFE500F-12-DLC
Price
Request Quote
Manufacturer
TDK-LAMBDA
Lead Time
Request Quote
Category
Circuit Protection » AC-DC Power Supply
Specifications
Manufacturer
TDK-Lambda
Manufacturers Part #
CPFE500F-12-DLC
Industry Aliases
CPFE500F-12-DLC
Brand
TDK-Lambda
Series
CPFE500F
Factory Pack Quantity
1
Cooling Method
Conduction
Dimensions
10.63 x 4.96 x 2.17"
Isolation
4.24 kVDC
Mechanical Style
Open / Enclosed Frame
Mounting
Chassis Mount
Number of Outputs
1
Operating Temperature
- 40 to + 85°C
Output Amps 1
42 A
Output Voltage V1 Nominal
12 VDC
Power
504 W
Subcategory
AC-DC Power Supply
Datasheet
Extracted Text
CPFE500F Series 500W Conduction Cooled Power Supplies Features Base plate cooled, no fan required High efŢ ciency Protective coating option MIL STD 461/462D CE102 Conducted EMC Key Market Segments & Applications SpeciŢ cations Model AC Input VAC/Hz 90 to 265VAC, 47-63Hz (up to 440Hz) (3) Input Current Model dependant (1) A 6.8 / 3.4 Inrush Current (115 / 230VAC) A 20 / 40 peak Power Factor - Meets EN61000-3-2 EfŢ ciency (typical) % 85% at 75% loading (Non ORing diode versions) Output Voltage Setpoint Accuracy - ±2% at 50% load Total Regulation % < 4%. (ORing diode option, adds 1V to load regulation) Ripple and Noise (20MHz BW) - 1% (1.5% below -10°C) Over Current Protection % 105 - 140% (Automatic Recovery) Over Voltage Protection - 125 - 145% (Cycle AC to reset) Series Operation - Yes Parallel Operation - Yes (Single wire, up to 6 units) ORing Diodes/FETs - Yes (option) Power On Signal (ENA) - Open collector (10mA sink current). Low (on) when output is present Auxiliary Supply - 10 - 14V, 20mA Remote On/Off (Opto isolated) - High = On Temperature CoefŢ cient - <0.01%/°C Overtemperature °C Shuts down between 90 - 130°C (Cycle AC to reset) Hold Up Time (230VAC) ms 10ms Leakage Curr. (at 230VAC, 50Hz) mA < 1.5mA Remote Sense - Yes, compensates up to 500mV cable drop Operating Temp. (Base plate) °C -40 to +85°C (2) Storage Temperature °C -40 to +100°C Humidity - Operating: 20 - 95%RH, Non operating 10 - 95%RH (Pcb assembly protective coated) Cooling - Conduction cooled through 6mm base plate Withstand Voltage - Input to Output 4242VDC, Input to Ground 2121VDC, Output to ground 500VDC Vibration (non operating) - MIL-STD-810E, Method 514.4, Proc 1, Category 1, 9 Shock - MIL-STD-810E, Method 516.5, Proc. I, IV, VI Safety Agency Approvals - UL60950-1, CSA 22.2 No 60950-1, EN60950-1 (Ed 2), CE Mark Line Dip - Complies with SEMI F47 (200VAC line only) Conducted EMI - EN55011, EN55022 (as per CISPR, 11/22) Class B, FCC47 part 15 subpart B) MIL STD 461E/461E/462D CE102, 115V and 220V Radiated EMI - EN55011, EN55022 (as per CISPR, 11/22) Class B, FCC47 part 15 subpart B) see app. note for details Immunity - IEC61000-4-2 (Contact Level 2, Air discharge Lvl 3), -3 (Lvl 3), -4(Lvl 3), -5 (Lvl 4), -6 (Lvl 3), -8 (Lvl 4), -11 (Class 3 ), -12 (Lvl 3), -14 (Class 3) Weight (Typ) g with cover 1400g, without cover 1200g Size (L x W x D) mm 270 x 126 x 55mm Warranty yrs 2 years (1) 100/200VAC (2) CPFE500F-12: -40 to 80°C. See instruction manuals for derating curves (3) Reduced PFC above 63Hz. Contact technical support for 440Hz operation. 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 24 Disclaimer: us.tdk-lambda.com/lp/legal.htm CPFE500F Series Model Selector Options Output Adjust Max Max ORing Protective Model Volt (V) Range (V) Curr (A) Watt (W) Part Number Desc. SufŢ x Diode (3) Cover Coating CPFE500F-12-NLC 12 9.6 - 14.4 42 504 -DLC Y Y Y CPFE500F-24-NLC 24 22.4 - 33.6 18 504 -NLC N Y Y CPFE500F-28-NLC 28 22.4 - 33.6 18 504 3) Reduces maximum output adjustment range by 1V CPFE500F-48-NLC 48 38.4 - 57.6 10.5 504 Preferred stocking part highlighted in green. Outline Drawing CPFE500F Signals Connections Pin Function Housing - Molex 22-01-1 102 10 Do not connect Crimp - Molex 50802 series 9 Output good - ENA dc output (or equivalents) 8 Tr im M6 x 18 stud for +ve output 7 Current share M6 x 18 stud for -ve output 6 Aux M6 nut, spring washer and 5 +remote on/off flat washer supplied for each 4 -remote on/off terminal 3 Aux commo n 2 - Sense 1 + Sense ac input connector Housing Tyco 350766-4 Crimp 926895-1 (3 of f) or equivalent Earth 10 Neutral 1 Live Notes 1. All customer fixings 10 x M4 clearance holes 2. All tolerances +/-0.5m m For Additional Information, please visit us.tdk-lambda.com/lp/products/cpfe-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 25 Revision A8: Sept 2013
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the CPFE500F-12-DLC?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
AC-DC, MODULAR, INPUT 115-230VAC, OUTPUT - MODEL DEPENDENT, 1000W
AC-DC, MODULAR, INPUT 230VAC, OUTPUT - MODEL DEPENDENT, 1500W
CA400 H41153
AC-DC, MODULAR, INPUT 115-230VAC, OUTPUT - MODEL DEPENDENT, 400W
AC-DC, MODULAR, INPUT 115-230VAC, OUTPUT - MODEL DEPENDENT, 600W
240 W, Single Output, 24 VDC@10 A AC-DC Power Supply
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods