TDK-LAMBDA NVA3-2GT00

NV300 Series 3.75” x 7.25” 300W Power Supplies Features  Medical Safety CertiŢ cations  Universal Input (90 - 264VAC)  Up to 5 Outputs (including standby)  No Minimum Loads  High EfŢ ciency  Low ProŢ le Key Market Segments & Applications SpeciŢ cations Model NV300 (300W Output Power) Input Voltage range - 90 - 264VAC (45-63Hz, 440Hz with reduced PFC) Inrush Current A <15A at 25C and 264VAC input, Cold Start Power Factor Harmonics - EN61000-3-2 Class A Compliant, 0.97 typical Total Regulation - CH1-3: 1.5%, CH4: 2.5% Ripple & Noise mV 1% or 50mV (whichever is the greater) EfŢ ciency - Up to 90%, conŢ guration dependant Minimum Load A None Overcurrent Protection - Yes Overvoltage Protection V Yes, see application notes for details Overtemperature Protection - Yes Hold Up Time (Typ) ms >16ms at 90VAC Input Leakage Current (max) μA 123μA 120VAC, 60Hz; 257μA 240VAC 60Hz, <300μA 264VAC, 63Hz (Type Test result) Remote Sense - On Outputs CH1 & CH2, 0.5V Maximum compensation DC Good - Logic low signal indicates CH1 is within regulation Remote On//Off - TTL logic level high (or open) will inhibit all outputs (except standby) Operating Temperature (1) - 0 to +70°C. Derate linearily to 50% load from 50°C to 70°C Storage Temperature - -40 to +85°C Humidity (non condensing) - 5 - 95% RH Cooling - Forced air 2m/s from input to output, unless internal temperature controlled fan is speciŢ ed Isolation - Input to Ground 2.25kVDC, Input to Output 4.3kVDC, Output to Ground 200VDC Vibration (non operating) - Conforms to MIL-STD-810E, Method 516.5, Pro I, IV, VI; EN60068-2-6; IEC68-2-6 Shock - Conforms to MIL-STD-810E/F, Method 514.4, Pro I, Cat 1,9; EN60068-2-27, -2-47, IEC68-2-27, -2-47, JIS C0041-1987 Safety Agency CertiŢ cations - UL/CSA/IEC/EN 60950-1, UL/CSA/IEC/EN 60601-1, ANSI/AAMI ES60601-1; (3) IEC/EN 61010-1 ; CE Mark Immunity - EN50082-2: EN61000-4-2, -3, -4, -5, -6, -8, -11, -14 Conducted Emissions and Flicker EN55011, EN55022 Class B (per CISPR.11/22), EN61000-3-3 Radiated Emissions - EN55011, EN55022 Class B (per CISPR.11/22) Weight (Typ) g 470 Size (pcb version) (2) in 3.75 x 7.25 x 1.34 (4.72 x 7.25 x 1.34 for N option version) Warranty yr Three Years Notes: (1) -20°C cold start (2) Including underside component leads (3) Designed to meet 61010-1 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 110 Disclaimer: us.tdk-lambda.com/lp/legal.htm NV300 Series Stocked Models Quick Selector Part Number Description CH1 (4) CH2 (4) CH3 CH4 CH5 Stand By (3) Global Option Type NVA30152P NVA3-350TTH +5V/40A - +12/5A -12V/2A - - NVA30166W NVA3-350FFH +5V/40A - +15V/5A -15V/2A - - NVA30042H NVA3-453TTH +5V/40A 3.3V/15A +12/5A -12V/2A - - NVA30135N NVA3-453FFH +5V/40A 3.3V/15A +15V/5A -15V/2A - - NVA30168Y NVA3-350TTH-N3 +5V/40A - +12/5A -12V/2A +5V/2A ATX (-N3) NVA30167X NVA3-350FFH-N3 +5V/40A - +15V/5A -15V/2A +5V/2A ATX (-N3) NVA30103D NVA3-453TTH-N3 +5V/40A 3.3V/15A +12/5A -12V/2A +5V/2A ATX (-N3) NVA30170R NVA3-453FFH-N3 +5V/40A 3.3V/15A +15V/5A -15V/2A +5V/2A ATX (-N3) Notes: (3) CH5 is a standby voltage (always on) Built to Order Model Selector CH1 CH1 Adjust. CH2 Adjust. CH3 Adjust. CH4 Adjust. (5) (2) (2) Code Range CH2 Code Range CH3 Code Range CH4 Code Range (1) +5V / 40A 5 5 - 5.5V +1.8V / 15A 1 0.9 - 2.5V +2.7V / 15A 2 2.5 - 3.8V +3.3V / 15A 3 2.5 - 3.8V (4) (3) +2.7V / 24A 2H 2.5 - 3.8V +12V/5A T 12 - 15V -3.3V / 2A 3H Fixed (6) (3) +3.3V / 24A 3H 2.5 - 3.8V +12V/8A TH 12 - 15V -5V / 2A 5H Fixed (4) (3) Omit 0 - +15V/4A F 12 - 15V -12V / 2A TH Fixed (6) (3) +15V/6.4A FH 12 - 15V -15V / 2A FH Fixed +12V / 25A T 12 - 13V +5V / 10A 5 3.3 - 5.5V +24V/2.5A G 18 - 24V Fan supply only 0H Fixed +5V / 16A 5H 3.3 - 5.5V Omit 0 - Omit 0 Fixed Omit 0 - (8) 24V / 12.5A G 24 - 28V +5V / 8A 5 5 - 5.5V +5V 12.5A 5H 5 - 5.5V +12V 10A T 12 - 15.5V +15V 10A F 12 - 15.5V Omit 0 - How to Create a Model Number NVA3- Enter number of outputs CH1 CH2 CH3 CH4 Global Case Other output voltages are available, contact factory. Code Code Code Code Option Option No option Blank Blank No case AC Fail, CH1 DC Good, Remote On/Off, +5V / 2A standby -N3 U U Chassis AC Fail, CH1 DC Good, Remote On/Off, +12V / 1A standby -N4 C U Chassis with Cover (7) F End fan, U chassis & cover (7) I IEC input, end fan, U chassis & cover Note: (1) Maximum combined current from CHs 1 & 2 = 40A (5) Maximum output voltage (includes remote sense) (2) Add ‘P’ sufŢ x to code for positive output (ex. 3HP) (6) 96W maximum output power (3) 1.5A maximum if used with “-F” option (7) CH4 code of 3H, 5H, TH, FH or 0H must be used (4) 60W maximum output power (8) 24 - 24.5V if CH2 = 5V, 24 - 26V if CH3 = 24V Example NVA3-353G0H-N3F Description: Triple output, 5V/40A, 3.3V/15A, 24V/2.5A, Global Option (N3), cover & fan (F). Outline Drawing Other Industrial Products 184.00 NV175, 350, 700 175W to 700W 1U power supplies 174.00 5.00 HWS 15 to 1500W single output power supplies CH1V ADJ HI (orLO) T2(+) CH2V ADJ For Additional Information, please visit T1(-) us.tdk-lambda.com/lp/products/nv-series.htm CH3V ADJ J1 HI J2 (orLO) PIN1 CH4V ADJ See the website for detailed datasheet and outline drawing. Without Global Option 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 111 Revision A7: Jul 2014 4.00 95.00 4.00 87.00