TDK-LAMBDA NVM100015

NVM175 Series 3” x 5” 180W Power Supplies Features  Reinforced Input to Output Isolation for IEC60601  Very low Earth Leakage and Class B EMC  Medical Approval (Designed for BF applications)  Standby supply and remote on/off 3  High EfŢ ciency (90%) & High Power Density (9.3 W/in )  Fits 1U applications  Dual Fusing Key Market Segments & Applications SpeciŢ cations Model NVM-175 Input Voltage range V 90 - 264VAC (45 - 63Hz) Inrush Current A <40A at 25C and 230VAC input, Cold Start Power Factor Harmonics - EN61000-3-2 Compliant, 0.97 typical Total Regulation - 1% Including full line & load changes Ripple & Noise mV 1% or 50mV (which ever is greater) Turn on time - 1.5s max at 90VAC & 100% rated output power EfŢ ciency % Up to 90% Minimum Load A None Short circuit protection - Yes Overvoltage Protection V 120-135% of output, recycle input to reset Overtemperature Protection - Yes Hold Up Time (Typ) ms >16ms at 90VAC input Leakage Current (max) μA 80mA max at 120VAC (60Hz), 200μA at 264VAC (63Hz) Remote Sense - Main output - 0.5V compensation maximum Power good signal - Logic “High” signal indicates AC supply is good and output is within regulation. Provides minimum 4ms AC fail warning. Remote On/Off - Yes, see options in model selector (1) Operating Temperature °C 0 to +70°C. Derate by 2.5% per °C from 50°C to 70°C . Storage Temperature °C -40°C to +85°C (max 12 months) Humidity (non condensing) - 5 - 95% RH Cooling - Forced air required, 2m/s (10CFM) blown from input to output (2) Isolation - Input to Output 4.5kVAC (Reinforced) , (2 x MOPPs (3rd edition 60601)), Input to Ground 1.5kVAC (Basic), Output to Ground 1.5kVAC Vibration (non operating) - MIL-STD810E, Method 516.5, Pro I, IV, VI. 2G, 10 - 500Hz Shock - MIL-STD-810E/F, Method 514.4, Pro 1, Cat 1, 30G per IEC68-2-27 Safety Agency Approvals - UL/CSA/IEC/EN 60950-1, UL/CSA/IEC/EN 60601-1, ANSI/AAMI ES60601-1, CE Mark Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11 Conducted Emissions & Flicker - EN55022 Class B (per CISPR.22), EN61000-3-3 Radiated Emissions - EN55022 Class B (per CISPR.22) Weight (Typ) g TBA Size mm 3” x 5” x 1.02” ; Covered option 3.3” x 5” x 1.6” Warranty yrs Three Years (1) -20°C cold start (2) Type tested to 4.5 kVAC (equivalent to 6.3 kVDC). Production tested to 4.3kVDC. 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 11 Disclaimer: us.tdk-lambda.com/lp/legal.htm #$)!"" '! )$ ##'! ') PIN 10 PIN 20 PIN 5 PIN 11 PIN 3 PIN 1 PIN 1 122.15 5.25 Side View 127.00 NVM175 Series How to Create a Model Number Stocked Models Quick Selector Product Code Part Desc. Main Standby Remote on/off T 12V/15A NVM100015 NVM1-1T000-S1 12V/15A 12V/0.2A Signal level low = enable G 24V/7.5A NVM100026 NVM1-1G000-S1 24V/7.5A 12V/0.2A Signal level low = enable no case Blank -S1 12V/0.2A standby, power good, logic level low enables main output U chassis + cover -C -S2 12V/0.2A standby, power good, logic level high enables main output U chassis -U NVM1-1 Vout 000 Global Case Connector Signal Option Option Standard vertical connector Blank Right angled connector (see handbook for “R” conection and mechanical details) -R Outline Drawing Output Connector J1 76.20 26 65.02 Pin Function Pin Function 5.59 13.41 10 standby +ve 20 standby -ve 9 Power good 19 Remote on/off Top View 8 +V output 18 Do not connect NVM175-C Models 7 +V output 17 +V output 6 +V output 16 +V output 5 + Sens e 15 - Sense 4 0V (DC return) 14 0V (DC return) 3 0V (DC return) 13 0V (DC return) Top View 2 Do not connect 12 0V (DC return) NVM175 Models 1 Do not connect 11 Do not connect Side View NVM175-C & NVM175-U Models 32.43 Mating Parts (Molex or equivalent) Conn Housing Pins Bottom View J1 39-01-2205 44476-3112 End View J2 09-50-8051 08-52-0113 NVM175-C & NVM175-U Models Other Medical Products NV175M 180W, 1U, 3.3V-28V output voltages, 3” x 5”, Reinforced isolation, 1-3 outputs NV175 175/180W, 1U, 0.9V-28V output voltages, 3” x 5”, 1-5 outputs EFE300M 300W, 1U, 12V-48V output voltage, 6” x 3”, BF rated, single output NV300 300W, 1U, 0.9V-28V output voltages, 7.25” x 3.75”, 1-5 outputs NV350-700 350-1150W, 1U, 3.2V-52.8V output voltages, 1-8 outputs Vega 450-900W, 0.5V-62V seamless output voltages, 1-11 outputs KM 15 to 40W, pcb mount,3.3V-24V output voltages, ClassII,1-3 outputs CSS65, 150 65W or 150W, 5V-48V output voltages, open frame, single output Alpha 1000 1000W, 1.8V-48V output voltages, 1-14 outputs SWS1000L 1000W 3.3V-60V output voltages, single output For other TDK-Lambda Medical Products, For Additional Information, please visit visit our Medical Webpage at us.tdk-lambda.com/lp/products/nv-series.htm us.tdk-lambda.com/lp/products/medical.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 12 Revision A6: Mar 2016