TDK-LAMBDA SWS3003/CO2

SWS300/600 Series Single Output General Purpose Power Supplies Features u Low Cost u Active Power Factor Correction u Universal Input (85 - 265VAC) u Input Transient Protected IEC61000-4 u SEMI F47 Certifi ed (208VAC Input) u Global safety Approvals u Level B EMI Key Market Segments & Applications Specifi cations Model SWS300 SWS600 Input Voltage range (1) - 85 - 265VAC (47 - 63Hz) or 120 - 370VDC Inrush Current (115 / 230VAC) A 20 / 40 at 25°C, cold start Power Factor - Meets EN61000-3-2 Input Current (100/200VAC) A 3.6 / 1.8A 7.2 / 3.6A Temperature Coeffi cient - <0.02%/°C Overcurrent Protection - >105%, Constant current style Overvoltage Protection V 3.3V: 4.1-5.3V, 5V: 6.25-7.5V, 12V: 13.8-16.8V 15V: 19.3-24.2V, 24V: 30-34.8V, 36V: 41.4-50.4V, 48V: 60-69.6V Overtemperature Protection - Yes, cycle AC to reset Hold Up Time (Typ) ms 20ms at 115/230VAC Leakage Current (max) mA SWS300: 0.75mA , SWS600: 1.5mA Remote Sense - None Yes Parallel Connection - None Yes Remote On/Off - None Yes, >4.5V to shutdown Power Fail Signal - None Yes, open collector output LED Indicator - Green LED = On Operating Temperature °C -10 to +65°C (See table for derating - model specifi c) Storage Temperature °C -30 to +85°C Humidity (non-condensing) - 30 - 90% RH operating, 10 - 95%RH non operating Cooling - Internal fan Withstand Voltage - I/P to Grnd 2kVAC, I/P to O/P 3kVAC, O/P to Grnd 500VAC, O/P to CNT 100VAC for 1 min Isolation Resistance - >100M at 25°C & 70%RH, Output to Ground 500VDC 2 Vibration (non operating) - 10 - 55Hz (sweep for 1 min)19.6m/s constant X, Y, Z 1 hour each plane) Immunity - EN61000-4-2, -3, -4, -5, -6, -8, -11 Safety Agency Approvals - UL60950-1, CSA60950-1, EN60950-1, EN50178, CE Mark, SEMI F47 (208VAC) Conducted & Radiated EMI - EN55011 / EN55022-B, FCC Class B Recommended EMI Filter - MC1206 MC1210 Weight (Typ) g 950 2000 Size (WxHxD) in 2.05 x 4.01 x 7.8” 3.62 x 4.72 x 7.48” Warranty yrs Two Years Notes: (1) Derate linearly to 80% load from 115VAC to 85VAC input (derate to 90% load for SWS600-5, no derating SWS300, 600-3) 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 99 Disclaimer: us.tdk-lambda.com/lp/legal.htm SWS300/600 Series Model Selector Derating Max Load Line Ripple Model 50°C 55°C 60°C 65°C Adjust Curr. Reg Reg Noise Eff.(3) Model Voltage Range (A) (mV) (mV) (mV) (typ)% SWS300 100% 91.6% 83.3% 50% SWS300-3 3.3V 2.97-3.96V 55 40 20 120 67/70 SWS600 100% 85% 70% 55% SWS300-5 5V 4.5-6V 55 40 20 120 75/78 Additional derating required when operating SWS600 with side SWS300-12 12V 9.6-13.2V 26 96 48 120 77/80 ventilation holes blocked - see installation manual. SWS300-15 15V 13.2-18.6V 21 120 48 120 79/83 SWS300-24 24V 20-28.8V 13 120 48 150 80/84 Options SWS300-36 36V 28.8-40V 8.7 180 72 200 82/85 SWS300-48 48V 40-57.6V 6.7 240 96 240 82/85 Suffi x Descriptor SWS600-3 3.3V 2.97-3.96V 100 (2) 40 20 100 69/71 /CO2 Double sided conformal coating SWS600-5 5V 4.5-6V 100 (2) 40 20 100 74/77 SWS600-12 12V 9.6-13.2V 50 96 48 120 78/81 Other Industrial Products SWS600-15 15V 13.2-18.6V 40 120 48 120 80/83 SWS600-24 24V 20-28.8V 25 120 48 150 81/84 HWS 15-1500W Single Output, High Reliability SWS600-36 36V 28.8-40V 16.7 180 72 200 81/85 SWS 50-150W Single Output SWS600-48 48V 40-57.6V 12.5 240 96 240 82/85 ZWS 5-240W PCB style Single Output Notes: (2) Peak rating of 120A for 10s (3) 115/230VAC SWS300 Outline Drawing Outline Drawing BAR CODE SWS300- 5 INPUT: 100-240VAC ~ 4.4A MADE IN CHINA OUTPUT: 5 V 55 A 50/60Hz V ADJ H +V +V +V -V -V -V L N For Additional Information, please visit us.tdk-lambda.com/lp/products/sws-series.htm 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 100 Revision A9: Dec 2011 (73) 8-M4 (16.5) 7-M3.5 NAME PLATE SEE NOTE "C" (Tapped on both sides) SEE NOTE "C" (Tapped at the bottom chassis) V.ADJ ON (20) 150¡À0.5 20 (72) 7.5 190¡À1 92¡À1 Hole at the opposite chassis 5MAX (20) 21MAX 150¡À0.5 20 AIR FLOW 15MAX SEE NOTE "C" (Tapped on both sides) 25 (25) 70¡À0.5 (21) 50¡À0.5 21 10 100¡À0.5 (10) NAME PLATE 120¡À1 21 11 9.0 10 H +S + + + - - -S PC TOG CNT PF N ( ) AC L 34 9.5 8.2