TDK-LAMBDA Z-232-9

Z+ High Voltage Series 200-800W Programmable Power Supplies Features  2U high  Built-in USB, RS-232 & RS-485 Interface  Optional LAN, GPIB & Isolated Analog Programming  Bench or Rack Mount  Constant Current or Voltage Modes  Five Year Warranty Key Market Segments & Applications Model Selector Voltage Current Max Ripple Noise Ripple Effi ciency Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Model Range Range (W) (mV) (mV) (mA) (100-200VAC) Z160-1.3-U 0 - 160 0 - 1.3 208 10 100 1.2 79 / 81 Z160-2.6-U 0 - 160 0 - 2.6 416 10 100 1.5 84 / 86 Z160-4-U 0 - 160 0 - 4 640 10 100 2.0 86.5 / 88.5 Z160-5-U 0 - 160 0 - 5 800 10 100 2.0 86.5 / 88.5 Z320-0.65-U 0 - 320 0 - 0.65 208 25 150 0.8 79 / 81 Z320-1.3-U 0 - 320 0 - 1.3 416 25 150 1.0 84 / 86 Z320-2-U 0 - 320 0 - 2 640 30 150 1.5 87 / 88.5 Z320-2.5-U 0 - 320 0 - 2.5 800 30 150 1.5 86.5 / 89 Z375-2.2-U 0 - 375 0 - 2.2 825 30 150 1.5 87.5 / 89.5 Z650-0.32-U 0 - 650 0 - 0.32 208 60 250 0.5 79 / 81 Z650-0.64-U 0 - 650 0 - 0.64 416 60 250 0.6 84 / 86 Z650-1-U 0 - 650 0 - 1 650 60 250 1.0 86.5 / 88.5 Z650-1.25-U 0 - 650 0 - 1.25 812 60 250 1.0 87 / 89 Options Accessories Option Code Part Number IEC320 cable USA plug (Included in model number above) -U 19” Rack Housing Front panel insulated output sockets (650V or 5A max)* -L2 (Accepts four 105mm width units or six 70mm width units) Z-NL100 Only one of the options below can be included: Blanking Panel for 19” Rack (70mm) Z-BP GPIB Interface* -IEEE Blanking Panel for 19” Rack (105mm) Z-WBP Voltage Programming Isolated Analog Interface* -IS510 Dual/Triple Housing Current Programming Isolated Analog Interface* -IS420 (Accepts two 105mm case units or three 70mm case units) Z-NL200 LAN Interface -LAN Serial Link Cable (One is included with each power supply) Z-RJ45 Communication Cable RS485 Z-485-9 Communication Cable RS232 Z-232-9 Part Number Example North American Line Cord (One included with -U suffi x) Z-U Z160-1.3-LAN-U *Requires wide body (105mm) case style 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 195 Disclaimer: us.tdk-lambda.com/lp/legal.htm Z+ Series Specifi cations (See brochure on website for full detailed specifi cations) Model Z160 Z320 Z375 Z650 Load Regulation CV 0.01% of rated voltage over 0 - 100% load change Line Regulation CV 0.01% of rated voltage over 0 - 100% input change Recovery Time (1) CV 2ms Temperature Coeffi cient CV 30ppm/°C following 30 minute warm up Temperature Stability CV 0.02% of rated voltage over 8 hours following 30 minute warm up time Warm up Drift (2) CV <0.05% of rated voltage of rated output voltage Up programming response time (10-90% or 90-10% of Vmax) CV 80ms 150ms 55ms 150ms Down programming resp time (CV) (10-90% or 90-10% of Vmax) Full load 100ms 150ms 65ms 150ms Down programming resp time (CV) (90-10% of Vmax) Zero load 2ms 2.5ms 2.5ms 3ms Load Regulation CC 0.09% of rated current over 0 - 100% Vout change Load Regulation thermal drift CC < 0.05% of rated current over 30 minutes after load change Line Regulation CC 0.02% of rated current over a 85 - 132 or 170 - 265VAC line change Temperature Coeffi cient CC 100ppm/°C of rated current after 30 minute warm up time Temperature Stability CC 0.05% of rated current over 8 hours following 30 minute warm up time Warm up Drift(2) CC <±0.1% of rated current Vout & Iout programming & readback resolution Digitally < 0.012% of rated voltage/current Vout & Iout programming & readback accuracy Digitally 0.05% of rated voltage + 0.05% of actual, 0.2% of rated current Voltage & Current Programming Analog By either Voltage (0-5V or 0-10V) or Resistance (0-5k or 0-10k) Voltage & Current Monitoring Analog 0-5V or 0-10V Voltage (user selectable), ±1% accuracy Overvoltage Shutdown (user programmable) V 5 - 176 5 - 353 5 - 413 5 - 717 Overtemperature Protection - User selectable - latched or non-latching Display - Voltage - 4 digits. Accuracy 0.5% of rated voltage or current ± 1 count Remote On/Off - By applied voltage or dry contact relay (user selectable logic) Output Good - Open Collector, Low on fail Remote Sense Compensation (per wire) V 5 5 5 5 Communication Interface - RS232, RS485 & USB standard, IEEE488 (GPIB) & LAN optional Series Operation - Up to two identical units (with external diodes) Parallel Operation - Up to six units in master-slave confi guration Input Voltage / Frequency - 85-265VAC, 47-63Hz Inrush Current - < 25A Hold Up Time (Typical) ms 16ms Power Factor Correction - Complies with EN61000-3-2 Class A (0.99 typ) Operating Temperature °C 0 - 50°C Storage Temperature °C -20 to +85°C Humidity (non condensing) %RH Operating: 20 - 90%RH, Storage 10 - 95%RH Cooling - Internal temperature controlled fan Withstand Voltage - I/P to GND 2kVAC, I/P to O/P 3kVAC, O/P to GND 1380VDC 1 min Insulation Resistance - >100M at 25°C & 70%RH Vibration (non operating) - IEC60068-2-64 Shock - <20G, half sine, 11ms. IEC60068-2-27 Safety Agency Certifi cations - UL61010-1, EN61010-1, IEC61010 (Designed to meet UL/EN60950-1) Immunity - IEC61326 (Designed to meet EN55022 / EN55024) Conducted EMI - IEC/EN61326-1 Industrial location B, FCC part 15-B, VCCI-B Radiated EMI - IEC/EN61326-1 Industrial location A, FCC part 15-A, VCCI-A Size (H x W x D) (Excluding handles and busbars) mm Standard body 83 x 70 x 350mm; Wide Body 83 x 105 x 350mm Weight kg Standard body 1.9kg; Wide Body 2.4kg Warranty yrs Five Years Notes: For Additional Information, please visit (1) Recovery to within 0.5% of rated voltage after a load us.tdk-lambda.com/lp/products/zplus-series.htm change of 10-90% (Output current 10-100% of Imax) (2) Over 30 minute warm up time after power on 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 196 Revision A6: Oct 2017