TDK-LAMBDA Z10-40-L-U

Z+ Series 200-800W Programmable Power Supplies Features  2U high  Built-in USB, RS-232 & RS-485 Interface  Optional LAN, GPIB & Isolated Analog Programming  Bench or Rack Mount  Constant Current or Voltage Modes  Five Year Warranty Key Market Segments & Applications Model Selector Voltage Current Max Ripple Noise Ripple Effi ciency Front Panel Adjust Adjust Power 5Hz-1MHz 20MHz BW 5Hz-1MHz % Output Jacks Model Range Range (W) (mV) (mV) (mA) (100-200VAC) (Option) Z10-20-U 0 - 10 0 - 20 200 5 50 50 80 / 82 Yes Z10-40-U 0 - 10 0 - 40 400 5 50 50 80 / 82 Yes Z10-60-U 0 - 10 0 - 60 600 6.25 75 75 80 / 82 Yes Z10-72-U 0 - 10 0 - 72 720 6.25 75 75 80 / 82 Yes Z20-10-U 0 - 20 0 - 10 200 5 50 30 82 / 84 Yes Z20-20-U 0 - 20 0 - 20 400 5 50 30 81 / 83 Yes Z20-30-U 0 - 20 0 - 30 600 6.25 75 45 82 / 84 Yes Z20-40-U 0 - 20 0 - 40 800 6.25 75 45 82 / 84 Yes Z36-6-U 0 - 36 0 - 6 216 5 50 15 83 / 85 Yes Z36-12-U 0 - 36 0 - 12 432 5 50 15 83 / 85 Yes Z36-18-U 0 - 36 0 - 18 648 6.25 75 22 84 / 85 Yes Z36-24-U 0 - 36 0 - 24 864 6.25 75 22 84 / 85 Yes Z60-3.5-U 0 - 60 0 - 3.5 210 5 50 8 83 / 85 Yes Z60-7-U 0 - 60 0 - 7 420 5 50 8 83 / 85 Yes Z60-10-U 0 - 60 0 - 10 600 6.25 75 12 83 / 85 Yes Z60-14-U 0 - 60 0 - 14 840 6.25 75 12 83 / 85 Yes Z100-2-U 0 - 100 0 - 2 200 8 80 3 83 / 85 No Z100-4-U 0 - 100 0 - 4 400 8 80 3 84 / 86 No Z100-6-U 0 - 100 0 - 6 600 10 100 4.5 84 / 86 No Z100-8-U 0 - 100 0 - 8 800 10 100 4.5 84 / 86 No Options Accessories Option Code Part Number Front panel terminals (60V or 24A max)* -L 19” Rack Housing Front panel insulated output sockets (100V or 24A max)* -L2 (Accepts four 105mm width units or six 70mm width units) Z-NL100 Only one of the options below can be included: Blanking Panel for 19” Rack (70mm) Z-BP GPIB Interface* -IEEE Blanking Panel for 19” Rack (105mm) Z-WBP Voltage Programming Isolated Analog Interface* -IS510 Dual/Triple Housing Current Programming Isolated Analog Interface* -IS420 (Accepts two 105mm case units or three 70mm case units) Z-NL200 LAN Interface -LAN Serial Link Cable (One is included with each power supply) Z-RJ45 Communication Cable RS485 Z-485-9 Communication Cable RS232 Z-232-9 Part Number Example North American Line Cord (One included with -U suffi x) Z-U Z10-20-LAN-L-U *Requires wide body (105mm) case style 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 193 Disclaimer: us.tdk-lambda.com/lp/legal.htm Z+ Series Specifi cations (See website for detailed specifi cations) Model Z10 Z20 Z36 Z60 Z100 Load Regulation CV 2mV + 0.01% of rated voltage over 0 - 100% load change Line Regulation CV 2mV + 0.01% of rated voltage over a 85 - 132 or 170 - 265VAC line change Recovery Time (1) CV 1ms Temperature Coeffi cient CV 30ppm/°C following 30 minute warm up Temperature Stability CV 0.02% of rated voltage over 8 hours following 30 minute warm up time Warm up Drift (2) CV <0.05% of rated voltage + 2mV of rated output voltage Up programming response time (10-90% or 90-10% of Vmax) CV 15ms 30ms 30ms 50ms 50ms Down programming resp time (CV) (10-90% or 90-10% of Vmax) Full load 10ms 30ms 30ms 50ms 50ms Down programming resp time (CV) (90-10% of Vmax) Zero load 190ms 200ms 250ms 310ms 900ms Load Regulation CC 5mA + 0.01% of rated current over 0 - 100% Vout change Load Regulation thermal drift CC < 0.05% of rated current over 30 minutes after load change Line Regulation CC 2mA + 0.01% of rated current over a 85 - 132 or 170 - 265VAC line change Temperature Coeffi cient CC 100ppm/°C of rated current after 30 minute warm up time Temperature Stability CC 0.05% of rated current over 8 hours following 30 minute warm up time Warm up Drift (2) CC <±0.1% of rated current Vout & Iout programming & readback resolution Digitally < 0.012% of rated voltage/current Vout & Iout programming & readback accuracy Digitally < 0.05% of rated voltage, < 0.1% of rated current Voltage & Current Programming Analog By either Voltage (0-5V or 0-10V) or Resistance (0-5k or 0-10k) Voltage & Current Monitoring Analog 0-5V or 0-10V Voltage (user selectable), ±1% accuracy Overvoltage Shutdown (user programmable) V 0.5 - 12 1 - 24 2 - 40 5 - 66 5 - 110 Overtemperature Protection - User selectable - latched or non-latching Display - Voltage - 4 digits. Accuracy 0.5% of rated voltage or current ±1 count Remote On/Off - By applied voltage or dry contact relay (user selectable logic) Output Good - Open Collector, Low on fail Remote Sense Compensation (per wire) V 1 1 2 3 5 Communication Interface - RS232, RS485 & USB standard, IEEE488 (GPIB) & LAN optional Series Operation - Up to two identical units (with external diodes) Parallel Operation - Up to six units in master-slave confi guration Input Voltage / Frequency (3) - 85-265VAC, 47-63Hz Inrush Current - < 25A Hold Up Time (Typical) ms 16ms Power Factor Correction - Complies with EN61000-3-2 Class A (0.99 typ) Operating Temperature °C 0 - 50°C Storage Temperature °C -20 to +85°C Humidity (non condensing) %RH Operating: 10 - 90%RH, Storage 10 - 95%RH Cooling - Internal temperature controlled fan Withstand Voltage - I/P to GND 2kVAC, I/P to O/P 3kVAC, O/P to GND 1380VDC 1 min Insulation Resistance - >100M at 25°C & 70%RH Vibration (non operating) - IEC60068-2-64 Shock - <20G, half sine, 11ms. IEC60068-2-27 Safety Agency Certifi cations - UL61010-1, EN61010-1, IEC61010 (Designed to meet UL/EN60950-1) Immunity - IEC61326 (Designed to meet EN55022 / EN55024) Conducted & Radiated EMI - EN55022-B, FCC part 15-B, VCCI-B Size (H x W x D) (Excluding handles and busbars) mm Standard body 83 x 70 x 350mm; Wide Body 83 x 105 x 350mm Weight kg Standard body 1.9kg; Wide Body 2.4kg Warranty yrs Five Years Notes: For Additional Information, please visit (1) Recovery to within 0.5% of rated voltage after a load us.tdk-lambda.com/lp/products/zplus-series.htm change of 10-90% (Output current 10-100% of Imax) (2) Over 30 minute warm up time after power on (3) Derate for 85-100 VAC; Z10-72-U (66A), Z20-40-U (36A), Z36-24-U (20A), Z60-14-U (12.5A), Z100-8-U (7.5A) 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 194 Revision B2: Oct 2017