TDK-LAMBDA ZMS10036

ZMS100 Series 100W, 2 x 4” AC-DC Power Supplies Features  80W Convection, 100W with Forced Air  Long e-cap lifetime  Compact 2 x 4 inch footprint  Medical approval with 2 x MoPP isolation  Suitable for Class I and Class II installations  Ceramic start-up cap Key Market Segments & Applications (1) SpeciŢ cations Model ZMS100 AC Input Voltage range (2) (4) - 85 - 264VAC (47-63Hz) 120 - 350VDC Input Fusing - Line and neutral Input Current (Typ) (230V/115VAC) A 1.0 / 2.0 Inrush Current - cold start A <40 (max at 264Vac input) Harmonic Compliance - Compliant to EN/IEC61000-3-2 class A Temperature CoefŢ cient - <0.02% / °C Typical Hold Up Time at 80W load,115/230VAC ms 22 / 108 Typical Hold Up Time at 100W load,115/230VAC ms 16 / 84 (see graphs for more detail) Leakage Current μA <100μA at 100V 60Hz input, <250μA at 230V 50Hz Touch Current (enclosure leakage) μA <100 μA Cooling - 80W with convection cooling, 100W max. with forced air cooling (see airţ ow rate graphs) EfŢ ciency - Up to 90% (see efŢ ciency curves) Operating Temperature °C -20°C to +70°C, derate linearly to 50% load from 50°C to 70°C Storage Temperature °C -40°C to +85°C Operational Altitude - 5000m Overcurrent Protection - hiccup (auto recovery) Overvoltage Protection - Latching (unit shutdown, recycle mains to restart) No Load Input Power at 230VAC W <0.5 Average Active EfŢ ciency % >87 Humidity (non condensing) RH Operating and storage : 5 - 95% (non-condensing) Withstand Voltage - Input to output 4kVac 2x MoPP, 1.5kVac input to ground 1x MoPP, 1.5kVac output to ground 1 x MoPP Isolation Resistance - >100MΩ at 25°C & 70%RH Isolation Class (3) - Construction suitable for Class II installations Vibration - 10 to 500Hz at 2G, EN60068-2-6 19,6m/s² Constant, X, Y, Z 1 hour each. Shock - 30G EN60068-2-27, -47, MIL-STD-810E IEC/EN/UL 60950-1, CSA22.2 No. 60950-1, IEC/EN 60601-1 (2nd & 3rd editions) Approvals - CE mark Designed to meet IEC/EN/UL/CSA 61010-1, ANSI/AAMI ES60601-1:2005 (r) 2012 CQC safety standard GB4943.1-2011 (pending) ZMS100-12, 15 and 24 type tested to EN60335-1 Conducted & Radiated EMI EN55011 / EN55022 level B conducted, level A radiated EN 61000-4-2 (Level 3 criteria A) -3 (Level 3 criteria A) -4 (Level 3 criteria A), Immunity (5) - -5 (Level 3 criteria A), -6 (Level 3 criteria A), -8 (Level 3 criteria A), -11(class 3), -12(level 3) Meets the requirements of EN60601-1-2:2007 (as applicable to a component power supply) Weight (Typ) g 150 Size (W x L x H) mm 50.8 x 101.6 x 31.9 (2” x 4” x 1.25”) Warranty yrs 3 Connectivity - Molex as standard with separate ground faston Input Molex 10-63-4027, output Molex 09-65-2048 Note: 1. SpeciŢ cation parameters apply at 25°C ambient temperature unless stated otherwise. 2. For 12V & 15V unit derate from 100% at 100V to 90% at 90V and to 80% at 85V, for 24V, 36V, & 48V unit derate from 100% at 90V to 90% at 85V. (convection and forced air ratings) . 3. ZMS100 uses Y1 capacitors to earth. 4. Consult Sales OfŢ ce for use under DC Input conditions 5. Criteria B for dips and interruptions, contact technical support for full details. 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 98 Disclaimer: us.tdk-lambda.com/lp/legal.htm ZMS100 Series Model Selector Nominal Output Maximum Maximum Maximum Maximum Ripple (6) Load Reg Line Reg Model Output Adjust Current Current Output Power Output power and noise from 0 - full from 85-264Vac Voltage (V) Range (V) Convection (A) Forced Air (A) Convection (W) Forced Air (W) (mv pk-pk) load (mv) (mv) ZMS100-12 12 11.4 to 13.2 6.7 8.4 80.4 100.8 120 120 60 ZMS100-15 15 14.25 to 16.5 5.4 6.7 81.0 100.5 150 150 75 ZMS100-24 24 22.8 to 26.4 3.4 4.2 81.6 100.8 240 240 120 ZMS100-36 36 34.2 to 39.6 2.25 2.8 81.0 100.8 360 360 180 ZMS100-48 48 45.6 to 52.8 1.67 2.1 80.2 100.8 480 480 240 Note: 6. At 115VAC input 25°C Outline Drawing ZMS100 12 - 15V Series ZMS100 24 - 48V Series ZMS100 Series Pinout ZMS100 Series Mating Parts J1 J2 J3 Connector Housing Crimp Pin Manufacturer PIN Connection PIN Connection PIN Connection J1 09-50-1031 08-70-1030 Molex 1 Live 1 +VE 1 Earth J2 09-50-1041 08-70-1030 Molex 2 Not Connected 2 +VE J3 22-18AWG - 2-52047-2 - Tyco 3 Neutral 3 0V (Faston) 16-14AWG - 3-520408-2 4 0V Other TDK-Lambda AC-DC Products ZPSA20-60 20 to 60W single output For Additional Information, please visit NV175 175W, 3x5”, 1-5 outputs us.tdk-lambda.com/lp/products/zms-series.htm ZWS 5 to 240W, single output KPSA 5 to 15W, pcb mount ZPD, ZPT 40W, 2x4” dual and triple outputs 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 99 Revision p5: Aug 2016