TDK-LAMBDA ZPT4051212N

ZPD/ZPT40 Series 2 x 4” 40W AC-DC Power Supplies Features  Dual and Triple Outputs  Wide Range AC Input  Low proŢ le, Industry Standard Footprint  Global Safety Agency Compliance  EN61000-4 Immunity  Up to 88% efŢ ciency Key Market Segments & Applications SpeciŢ cations Model ZPD40 ZPT40 Input Voltage range - 90 - 264VAC (47 - 440Hz) or 120 - 370VDC* Inrush Current (132/265VAC) A 25 / 50 (cold start) Input Current (115/230VAC) A 1.6 / 1.0 Temperature CoefŢ cient - ±0.05%/°C Voltage Accuracy % V1: ±3%, V2: ±4%, V3: ±3% Minimum Load A V1: 0.4A, V2: 0.2A Load Regulation (1) % V1: ±3%, V2: ±5%, V3: ±1% Line Regulation (2) % V1: ±1%, V2: ±2%, V3: ±1% Ripple & Noise (3)(4) mV 1% or 50mV whichever is greater Short Circuit Protection - Continuous - hiccup mode Overvoltage Protection V Typically 110-130% of nominal Hold Up Time (Typ) ms 8ms at 115VAC input LED Indicator - None Operating Temperature 0 to +70°C, derate linearly to 50% load from 50°C to 70°C Storage Temperature - -20 to +85°C Humidity (non condensing) - 10 - 95% RH Cooling - Convection Withstand Voltage Input to Ground 1.5kVAC, Input to Output 3kVAC, Output to Ground 500VAC for 1 min. Isolation Resistance >100M at 25C & 70%RH, Output to Ground 500VDC 2 Vibration (non operating) 23.52m/s (10 - 55Hz: constant sweep 1 min X, Y, Z for 1 hour) 2 Shock - < 196.1 m/s (20G) Safety Agency Approvals - UL60950, CSA60950, EN60950, CE Mark (LVD) Conducted & Radiated EMI - EN55022-B, FCC Class B (5) Immunity - EN61000-4-2,-3,-4,-6,-8 Weight (Typ) g (oz) 170g (6oz) Size (WxLxH) in 2 x 4 x 1.2 (including underside components ) Warranty yrs Two Year *Safety certiŢ ed for AC input only. Notes: (1) ZPD, ZPT for a 60% to 100% or 100% to 60% change in load (2) ZPT40-3512N V2: ±3%, 100-240VAC (3) Measured with 0.1uF ceramic & 10uF electrolytic at 20MHz BW (4) ZPT40-3512N, V1 & V2 100mV (5) May require additional external Ţ ltering to meet conducted class B EMI 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 152 Disclaimer: us.tdk-lambda.com/lp/legal.htm ZPD/ZPT40 Series 2 Output Module Codes ZPD/ZPT Outline Drawing Max. Peak Output Eff. 4.00 [101.60] Model O/P(V) O/P(A) (A)(5) Pwr(W) (%) 3.75[95.3] Dual Outputs ZPD40-512 V1 +5.0 3.2 4.0 40.0 (6) 77 V2 +12.0 2.0 2.5 ZPD40-524 V1 +5.0 3.2 5.0 40.0 (6) 78 ACN 1 2 V2 +24.0 1.0 1.5 ACL 3 4 Triple Outputs 5 6 ZPT40-5125N V1 +5.0 3.2 5.0 40.5 (6) 75 V2 +12.0 2.0 2.5 V3 -5.0 0.3 0.5 VR ZPT40-51212N V1 +5.0 3.2 5.0 42.6 (6) 75 V2 +12.0 2.0 2.5 V3 -12.0 0.3 0.5 ZPT40-51515N V1 +5.0 3.2 4.5 42.0 (6) 75 V2 +15.0 1.5 2.3 V3 -15.0 0.3 0.5 ZPT40-52412N V1 +5.0 3.2 5.0 42.6 (6) 75 V2 +24.0 1.0 1.5 V3 -12.0 0.3 0.5 ZPT40-5245N V1 +5.0 3.2 5.0 40.5 (6) 75 Pin Connection (ZPD/ZPT) V2 +24.0 1.0 1.5 PIN Function V3 -5.0 0.3 0.5 ZPT40-52412P V1 +5.0 3.2 5.0 42.6 (6) 75 1 V2 2 V1 V2 +24.0 1.0 1.5 3 V1 V3 +12.0 0.3 0.5 4 COM ZPT40-3512N V1 +3.3 5.0 7.0 30.0 70 5 COM V2 +5.0 2.0 3.5 6 V3 V3 -12.0 0.3 0.5 Note: (5) Average not to exceed max power, <30s, 10% duty cycle For Additional Information, please visit (6) 50W with 30CFM forced air cooling, derate linearly to 35W from 50°C to 70°C us.tdk-lambda.com/lp/products/zp-series.htm Other Industrial Products SC40/60 40 to 80W, 3x5”, 1 - 3 outputs NV175 175W, 3x5”, 1-5 outputs ZWS 5 to 240W, single output 1-800-526-2324 • www.us.tdk-lambda.com/lp/ 153 Revision p1.3: Apr 2015 4-Ø0.12 [Ø3.00] 1.75[44.5] 1.20 [30.48] 2.00 [50.80]