TDK-LAMBDA ZUP/NL101

Europe / North America Asia / Far East / Middle East NORTH AMERICA JAPAN Lambda Americas, Inc. Densei Lambda KK, 3055 Del Sol Boulevard 5F Dempa Bldg, 1-11-15 Higashigotanda, San Diego, CA 92154 Shinagawa-Ku, Tokyo 141-0022, Japan Tel: +1-800-LAMBDA-4 Tel: +81 3 3447 4693 Tel: +1-619-575-4400 Fax: +81 3 3447 4750 Fax: +1-619-429-1011 www.densei-lambda.com www.lambdapower.com CHINA Lambda Americas, Inc. 405 Essex Rd. Neptune, NJ 07753 Shanghai Office of Wuxi Nemic-Lambda Electronic Co. Ltd. Tel: +1-732-922-9300 Fax: +1-732-922-1441 4F 2008 Hongmei Bldg, Hongmei Road, www.lambda-hp.com Cao He Jing Hi-Tech Park, ZER 20 O-UP 0W/400W/800W Shanghai, China 200233 UK Tal: +86-21-6485-0777 Fax: +86-21-6485-0666 Programmable DC Power Supplies Lambda UK Densei-Lambda K.K. Beijing Office Kingsley Avenue Ilfracombe, Devon Room 818 Office Tower One, Beijing Junefield Plaza, EX 34 8ES United Kingdom Built-in RS-232 & RS-485 Interface No.6 Xuanwumenwai St., Tel: +44-1271-856666 Fax: +44-1271-864894 Xuanwu District, Beijing P.R.CHINA 100052 E-mail: powersolutions@lambda-europe.com with IEEE488 (GPIB) optional. Tel: +86-10-6310-4872 Fax: +86-10-6310-4874 www.lambda-gb.com www.densei-lambda.com.cn FRANCE Constant Voltage/Constant Current HONG KONG Lambda SAS, Built-in RS-232 & RS-485 Interface ZAC des Delaches Densei Lambda Hong Kong Branch BP 1077 - Gometz le Chatel An embedded Microprocessor controller Room. 8, 27/F, Mega Trade Center 91940 LES ULIS 1 Mei Wan St. Tsuen Wan, N.T. Hong Kong Digital Encoder Knob Tel: +33 1 60 12 71 65 Tel: +852-2420-6693 Fax: +852-2420-3362 Fax: +33 1 60 12 71 66 www.densei-lambda.com Software Calibration www.lambda-f.com Last Setting Memory KOREA GERMANY Parallel Operation (Master/Slave) Active Current Sharing Densei Lambda K.K. Korea Branch Lambda GmbH 6F Songok Bldg. 4-1 Soonae-Dong External Voltage or Resistance Programming Karl-Bold-Str.40, Pundang-Gu, Songnam-Shi Kyonggi-Do, 463-020 Korea Voltage up to 120V, Current up to 132A D-77855 Achern, Germany Tel: +82-2-556-1171 Fax: +82-2-555-2706 Tel: +49-7841-666-0 Fax: +49-7841-500-0 www.densei-lambda.co.kr Active Power Factor Correction: 99% E-mail: info.germany@lambda-europe.com 85~265Vac Universal Input Voltage www.lambda-germany.com MALAYSIA 19" Rack Mounted ATE and OEM AUSTRIA Nemic-Lambda (M) SDN. BHD. No.7.3, 7th Floor, Jaya Shopping Center, Worldwide Safety Agency Approvals Lambda GmbH Jalan Semangat Section 14, 46100 Aredstrasse 22, CE Mark for LVD and EMC Regulation Petaling Jaya Selangor, D.E, Malaysia A - 2544 Leobersdorf, Austria Tel: +60-3-7957-8800 Fax: +60-3-7958-2400 Tel: +43 - 2256 - 655 84 Fax: +43 - 2256 - 645 12 www.densei-lambda.com E-mail: info.germany@lambda-europe.com www.lambda-austria.com SINGAPORE C US ITALY Nemic-Lambda (S) PTE Ltd. LISTED .. geprufte .. Blk 1008 Toa Payoh North # 06-01/08 Sicherheit TESTING EQUIPMENT TUV Rheinland Lambda S.r.l. 65SA Singapore 318996 Via dei Lavoratori 128/130 Tel: +65-6251-7211 Fax: +65-6250-9171 IT 20092 Cinisello Balsamo (MI) www.densei-lambda.com Tel: +39-02-6129-3863 Fax: +39-02-6129-0900 www.lambda-italy.com ISRAEL SCANDINAVIA Nemic Lambda Ltd. Sales Office: Lambda Scandinavia Kibbutz Givat Hashlosha Tel-Aviv 48800, Israel Rallarvägen 41 Tel: +972-3-9024-333 Fax: +972-3-9024-777 SE-184 40 Akersberga Plant: Sweden POB 500 Karmiel Industrial Zone 20101, Israel Tel: +46 854 084 990 Tel: +972-4-9887-491 Fax: +972- 4-9583-347 Fax: +46 854 066 096 E-mail: info@nemic.co.il E-mail: info@lambda-scandinavia.com www.nemic.co.il www.lambda-scandinavia.com ZERO-UP 200W/400W/800W UP Programmable DC Power Supplies Control Flexibility for Worldwide Applications AD0807-B Product Line Up Power Supply Identification / Accessories Output Output Output ZUP 36 - 12 / Model Voltage Current Power ( VDC ) ( A ) ( W ) ZUP6-33 0 ~ 33 198 Series Name Output Output Voltage Current ZUP6-66 0 ~ 6 VDC 0 ~ 66 396 ( 0 ~ 36V ) ( 0 ~ 12A ) ZUP6-132 0 ~ 132 792 ZUP10-20 0 ~ 20 200 ZUP10-40 0 ~ 10VDC 0 ~ 40 400 Front Panel ZUP10-80 0 ~ 80 800 Serial Link Cable L. Output Jacks up to 60V output models ZUP20-10 0 ~ 10 200 W. Cable included BLANK: Standard ZUP20-20 0 ~ 20VDC 0 ~ 20 400 BLANK: None AC Cable ZUP20-40 0 ~ 40 800 E. Europe 0 ~ 6 216 ZUP36-6 GB. UK U. USA 0 ~ 36VDC 0 ~ 12 432 ZUP36-12 O. Unterminated 0 ~ 24 864 ZUP36-24 I. Middle East 0 ~ 3.5 210 ZUP60-3.5 BLANK: None 0 ~ 60VDC 0 ~ 7 420 ZUP60-7 0 ~ 14 840 ZUP60-14 0 ~ 80VDC 0 ~ 2.5 200 ZUP80-2.5 0 ~ 5 400 ZUP80-5 0 ~ 120VDC 0 ~ 1.8 216 ZUP120-1.8 0 ~ 3.6 432 ZUP120-3.6 Front Panel Rear Panel 5 3 5 6 4 6 1 4 2 13 12 7 11 8 2 9 3 1 10 1. Digital Voltmeter 2. Digital Amperemeter 1. IEC320 AC Input Connectors 3. Constant Voltage Mode Indicator 2. Remote IN Programming via RS-232/RS-485 4. Constant Current Mode Indicator 3. Remote OUT Via RS-485 Communications 5. Voltage/Current, OVP/UVP, Address Adjust Chaining Power Supplies to Serial 6. Alarm ( OVP, OTP, FOLD ) Communication Bus. 7. Output ON/OFF Control 4. External Analog Programing Control Connector 8. Local/Remote Select 5. Output Bus Bars (6V to 60V) model shown. 9. Foldback Protection Control 80V to 120V models PHOENIX: PSC Plug Connectors 10. AC Power Switch 6. Ground Thread 11. Voltage/Current Mode Control 12. Overvoltage/Undervoltage Setting 13. Address Setting 1 ZUP Configurations BENCHTOP POWER SUPPLY Single Parallel ( Master / Slave ) PARALLEL OPERATION Master - Slave method: Active current sharing up to 5 units. REMOTE PROGRAMMING VIA RS-232 . Up to 31 ZUP units can be controlled via RS-232 interface. RS-232 RS-485 RS-485 ZUP (1) ZUP (2) ZUP (31) 10m max. 1000m max. Linking ZUP units with RS-232 control. REMOTE PROGRAMMING VIA RS-485 Up to 31 ZUP units can be controlled via RS-485 interface For operation environments that require high noise immunity or long distance communication, it is recommended to use the built-in RS-485 interface. RS-485 RS-485 RS-485 ZUP (1) ZUP (2) ZUP (31) 1000m max. Linking ZUP units with RS-485 control. 2 GP485A GPIB RS485 CONTROLLER Remote Programming Via GPIB. GPIB RS-485 CONTROLLER The GP485A is a high performance serial to GPIB Interface It enables a ZUP series with RS-485 port to be a Talker, Listener, or controller on the GPIB RS-485 RS-485 * Controls up to 31 ZUP units through a single GPIB address. GPIB BUS GP485A ( 1 ) ZUP ( 1 ) ZUP (31) * Conforms to all versions of the IEEE488 standard, including IEEE488.2. * 19” racking possibility. RS-485 RS-485 * Application software - LabView, LabWindows. GP485A ( 2 ) ZUP ( 1 ) ZUP (31) RS-485 RS-485 GP485A (14 ) ZUP ( 1 ) ZUP (31) Rack Mounted ATE and OEM up to 2.4KW Six units can be assembled into 19-inch rack / 3U high to meet your configuration requirements Power Modules Table Module Type 200W 400W 800W 0 ~ 6V 33A 66A 132A 0 ~ 10V 20A 40A 80A 0 ~ 20V 10A 20A 40A 0 ~ 36V 6A 12A 24A 0 ~ 60V 3.5A 7A 14A 0 ~ 80V 2.5A 5A 0 ~ 120V 1.8A 3.6A 19"rack width 1 / 6 width 1 / 6 width 2 / 6 width 3 Zup Series Specifications MODEL ZUP6-33 ZUP6-66 ZUP6-132 ZUP10-20 ZUP10-40 ZUP10-80 ZUP20-10 ZUP20-20 ZUP20-40 ZUP36-6 ZUP36-12 ZUP36-24 ZUP60-3.5 ZUP60-7 ZUP60-14 ZUP80-2.5 ZUP80-5 ZUP120-1.8 ZUP120-3.6 0-80 0-120 OUTPUT VOLTAGE ( *1) V 0-6 0-10 0-20 0-36 0-60 OUTPUT CURRENT ( *2) A 0-33 0-66 0-132 0-20 0-40 0-80 0-10 0-20 0-40 0-6 0-12 0-24 0-3.5 0-7 0-14 0-2.5 0-5 0-1.8 0-3.6 RATED OUTPUT POWER W 198 396 792 200 400 800 200 400 800 216 432 864 210 420 840 200 400 216 432 CONSTANT LOAD REGULATION - 0.005%+2mV From No load to Full load, constant input voltage. 0.005%+4mV VOLTAGE LINE REGULATION - 0.005%+1mV From 85-132VAC or 170-265VAC, constant load. 0.005%+2mV RMS RIPPLE (5Hz-1MHz Bandwidth) mV 5585585 55555555 20 20 20 20 RIPPLE (pk to pk) (20MHz Bandwidth) mV 50 50 100 50 50 90 50 50 80 50 50 70 50 50 60 70 70 80 80 0.2 0.2 RECOVERY TIME ( *3) mS 1 0.5 0.2 0.2 0.2 - 30ppm/ºC from rated voltage following 30-minute warm-up. TEMPERATURE COEFFICIENT TEMPERATURE DRIFT - 0.01%+2mV Change in output over 8-hour interval under constant line, load and ambient temp following 30-minute warm-up. UP PROGRAMMING RESPONSE TIME (*4) mS 50 50 60 50 50 60 50 50 60 50 50 60 50 50 60 100 100 100 100 DOWN PROGRAMMING FULL LOAD mS 50 50 50 50 50 50 50 50 50 50 50 50 50 50 70 60 60 80 80 800 1000 RESPONSE TIME NO LOAD mS 250 350 400 500 750 CONSTANT - 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.07%+10mA 0.01%+5mA 0.01%+5mA 0.01%+5mA 0.01%+5mA LOAD REGULATION ( *5) CURRENT LINE REGULATION ( *6) - 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+5mA 0.01%+2mA 0.01%+2mA 0.01%+2mA 0.01%+2mA RMS RIPPLE (5Hz-1MHz Bandwidth) mA 50 100 200 25 50 100 15 30 60 7.5 15 30 5 10 20 5 5 5 5 TEMPERATURE COEFICIENT - 100ppm/ ºC from rated current following 30-minute warm-up. TEMPERATURE DRIFT ( *8) - 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.05%+10mA 0.02%+5mA 0.02%+5mA 0.02%+5mA 0.02%+5mA RESOLUTION - Better than 0.028% of rated output voltage PROGRAMMING ( *9) VOLTAGE ACCURACY - 0.02%+5mV 0.02%+8mV 0.02%+12mV 0.02%+20mV 0.02%+35mV 0.02%+50mV 0.02%+80mV RESOLUTION - Better than 0.03% of rated output current CURRENT ACCURACY - 0.4%+40mA 0-88 0-132 OVERVOLTAGE PROTECTION ( *10) V 0-7.5 0-13 0-24 0-40 0-66 HOLD-UP TIME - 20mS At 100V/200VAC, rated output voltage and output current. DISPLAY VOLTAGE - 3 digits ( 6v; 20v; 36v; 60v; 80v); 3.5 digits ( 10v; 120v ) accuracy: 0.2% +/- 2 digits. CURRENT - 3.5 digits (132A); All others 3 digits, accuracy: 0.5% +/- 3 digits. STATUS - CV/CC, Alarm, Fold, Local/Remote, On/Off. OUTPUT PROTECTIONS - Over Voltage, Over Temperature, Foldback. INPUT INPUT VOLTAGE ( *11) - 85-265Vac Continuous, 47-63Hz INPUT CURRENT ( *12 ) A 3.0/1.5 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.9/1.4 5.6/2.7 11.2/5.4 2.6/1.3 4.9/2.4 2.9/1.4 5.3/2.6 INRUSH CURRENT ( 100/200Vac ) A 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7) 15 30 15/30 (*7) 15 15/30 (*7) 15 EFFICIENCY ( *12 ) % 69/72 74/77 74/77 73/77 79/82 77/81 74/78 79/83 79/82 76/80 80/84 80/84 75/79 80/84 80/84 78/82 83/87 78/82 82/86 INPUT CURRENT HARMONICS - Complies with EN61000-3-2, Class A POWER FACTOR (TYP) - 0.99 at 100/200Vac, 100% load. ENVIRONMENT - 0 to 50 ºC ; 100% Load. OPERATING TEMPERATURE OPERATING HUMIDITY - 30-90% RH ( No dewdrop ). STORAGE TEMPERATURE - -20 to 70 ºC STORAGE HUMIDITY - 10 - 95% RH (No dewdrop). MECHANICAL VIBRATION - 10-55Hz, Amplitude (sweep 1 min ) 2G, X, Y, Z, When mounted with mounting screws. - Less than 20G SHOCK WEIGHT Kg 2.9 3.2 5.8 2.9 3.2 5.8 2.9 3.2 5.8 2.9 3.2 5.8 2.9 3.2 5.8 2.9 3.2 2.9 3.2 SIZE (WxHxD) mm 200W and 400W units: 70 x 124 x 350. 800W units: 140 x 124 x 350 (Refer to outline drawing) EXTERNAL CONTROL OUTPUT ON/OFF - By TTL Signal or Dry Contact (Refer to instruction manual). FUNCTIONS OUTPUT GOOD - Open collector (Refer to instruction manual). OUTPUT VOLTAGE PROGRAMMING - By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual). OUTPUT CURRENT PROGRAMMING - By Voltage ( 0-4V ) or by Resistance ( 0-4K ) (Refer to instruction manual). REMOTE SENSING - Maximum 0.5V drop on each load wire for model up to 60V and 2V for the 80V, 120V models COMMUNICATION INTERFACE - RS-232 and RS-485 Built-in, IEEE488 Optional. APPROVALS SAFETY STANDARDS - UL3111-1, EN61010-1 EMC STANDARDS - EN61326-1, IEC 61326-1, FCC part 15 (class A). CONDUCTED EMI - EN55022-B, FCC-B, VCCI-B RADIATED EMI - EN55022-A, FCC-A, VCCI-A SERIES OPERATION - Up to 2 units (Refer to instruction manual). PARALLEL OPERATION - Master - Slave method; up to 5 units (Refer to instruction manual). COOLING - Forced air by blower fan (Blower fan is mounted within unit). WITHSTAND VOLTAGE - Input - Chassis...2.0kVAC 1 min, Input - Output...3.0kVac 1 min, Output - GND...500VAC 1 min. ISOLATION RESISTANCE - More than 100MOhm at 25 ºC and 70% R.H. NOTES: *4. From zero volts to full scale , resistive load and current setting at maximum. *8. Change in output over 8 hour interval constant line, load and ambient temperature *11. For cases where conformance to various safety specs. (UL, IEC, etc.) are *1. Minimum voltage is guaranteed to maximum 0.2% of the rated output voltage. *5. From no load to full load , constant input voltage. following 30-minutes warm-up. required, to be described as 100-240VAC (50/60Hz) on name plate. *2. Minimum current is guaranteed to maximum 0.4% of the rated output current. *6. From 85~132Vac or 170~265Vac constant load. *9. Given for control of the output via the serial communication or via front panel controls. *12. At 100/200Vac and Maximum Output Power. *3. Time for recovery to within +/-50mV against current change of 50% to 100%. *7. At cold start Ta=25 ºC. *10. Inverter shut down method, manual reset (OVP will shut down output) 4 5 GP485A GPIB RS485 CONTROLLER GP485A SPECIFICATIONS The GP485A has all the software and logic required to implement the physical and electrical Specifications of the IEEE488 and RS-485 standards Input Voltage /freq Vac 85 ~ 265Vac continuous 47 ~ 63 Hz Input consuption W 5W IEEE 488 Capability SH1,AH1,T6,TE0,L4,LE0,SR1,RL0,PP1,DC1,DT0,C0,E1,E2 Indication LED's Power /Ready ,Talk ,Listen ,SRQ Baud rate bps Optional 300 , 600 ,1200 , 2400 , 4800 , 9600 Default :9600 Address 1 up to 30 can be set using an address switch Operating temp ºC 0~ 50 Storage temp ºC -20 ~ 70 Conducted emission EN5022B,FCC-B Radiated emission EN5022A,FCC-A Safety standards UL3111-1 , EN61010-1 EMC standards EN61326-1, IEC 61326-1, FCC part 15 (class A). Withstand voltage Input - Chassis…2.0kVAC 1min, Input - Output…3.0kVac 1 min, Output - Chassis…500VAC 1 min. Vibration G 10-55Hz, Amplitude (sweep 1 min ) 2G, X, Y, Z, When mounted with mounting screws. Size (WxHxD) mm 70x124x350 (GP 485A has all the mechanical specifications & mounting hole as ZUP200W/400W units) Weight Kg 1.95 Rear Panel Front Panel 1. RS-485 OUT: EIA-568A shielded type connector, 1. Power/Ready: Indicates that the power is “ON” and used for RS-485 communication with ZUP power the self-test has passed successfully. The unit is supplies. ready to operate once the LED illuminates. 2. GPIB: Shielded 24-pin Champ female connector, 2. Talk: Indicates that the GP485A is addressed as a with metric screwlock. Used for GPIB GPIB Talker. communication with the GPIB controller. 3. Listen: Indicates that the GP485A is addressed as a GPIB Listener. 3. AC Input: IEC type appliance inlet. 4. SRQ: Indicates that the GP485A signal line SRQ is 4. Address setting Dip switch. asserted. 5. AC ON/OFF: Turns AC power On and Off. 6 Outline Drawings ZUP 200W/400W Units Note 1 _ _ + + External 0.5 1 11.0 70.0 350.0 30.0 21.5 19.0 Control Connector +V -V POWER SUPPLY ALM CV V CC A ADDR OVP/UVP V/A FOLD REM OUT NEMIC-LAMBDA LTD. H POWER _ + + _ 1 20.0 1 11.0 48.0 290.0 IEC320 RS-232/RS-485 AC Inlet communication connectors Note 2 _ +0.5 201.5 59.5 20.0 DIMENSIONS: mm 70x124x350 B A A B +V -V WEIGHT: Kg + _ 0.5 48.4 200W units: 2.9 400W units: 3.2 A B A B Rear Panel Note: Output Voltage 1. Housing AMP: 87631-9 Connector with pins AMP: 87523-6. For 80V, 120V Rubber Bumpers 2. Header PHOENIX: PSC 1,5/3-M-PE Mounting Holes Models. Tap M4 x 4 marked ‘A’ 4 places marked ‘B’ Plug PHOENIX: PSC 1,5/3-3-F (removable) Plastic cable housing Included with the power supply. Outline Drawings ZUP 800W Unit REMOVABLE HANDLE Note 1 _ External + + _ 0.5 1 140.0 11.0 Control 350.0 30.0 47.0 46.3 Connector +V -V POWER + _ + _ 1 20.0 1 20.0 99.6 290.0 RS-232/RS-485 18.5 IEC320 communication AC Inlet DIMENSIONS: connectors A A 140x124x350 mm. B B WEIGHT: 5.8 kg. Note: 1. Housing AMP, 87631-9 B B with pins AMP, 87523-6. A A Included with the power supply. + _ 0.5 201.50 59.5 Rubber Bumpers: 4 places marked ‘B’ (removable) Mounting Holes: Tap M4 x 4 marked ‘A’ 7 + _ 0.5 124.0 + _ 0.5 124.0 + _ 0.5 118.90 10.6 + _ 1 139.5 22.0 22.0 + _ 1 131.0 + _ 1 13.0 131.0 Accessories 1. AC Cord Sets Five optional cords are possible according to order: Region Europe United Kingdom Japan Middle East North America Output Power 850W 850W 850W 850W 850W AC Cords 10A/250Vac L=2m 10A/250Vac L=2m 13A/125Vac L=2m 10A/250Vac L=2m 13A/125Vac L=2m Wall Plug INT'L 7/VII BS1363 SI-32 NEMA 5-15P Power Supply IEC320-C13 IEC320-C13 IEC320-C13 IEC320-C13 IEC320-C13 Connector Part Number P/N: ZUP/E P/N: ZUP/GB P/N: ZUP/J P/N: ZUP/I P/N : ZUP/U 2. Communication Cable RS-232/RS-485 cable is used to connect the power supply to the PC controller RS-485 RS-232 RS-485 RS-232 Mode PC Connector DB-9F DB-9F DB-25F DB-25F Communication Cable Shield Ground L=1m Shield Ground L=1m Shield Ground L=1m Shield Ground L=1m Power Supply Connector EIA/TIA-568A (RJ-45) EIA/TIA-568A (RJ-45) EIA/TIA-568A (RJ-45) EIA/TIA-568A (RJ-45) ZUP/NC404 P/N ZUP/NC401 ZUP/NC402 ZUP/NC403 DB-25F (female connector) DB-9F (female connector) EIA/TIA (RJ-45) 3. ZUP serial link cable Used to chain Power Supply to Power Supply from a serial communication bus Mode Communication cable Power Supply Connector Remote IN /OUT P/N RS 485 Shield Ground , L=50cm EIA /TIA -568 A (RJ-45) ZUP/ W 8 +0.5 160.0 464 484 Options ( 200W, 400W, 800W Models ) 1. FRONT PANEL OUTPUT JACKS Outline Drawing: Physical Dimensions in mm. Up to 60V output models ZUP 200W/400W Units: 70x153x405.9 P/N: ZUP / L ZUP 800W Units: 140x153x405.9 +0.5 70 Max. 405.9 Up to 20A output current via front panel jacks. 2. ZUP ASSEMBLIES Dual Output Packing 200W/400W models P/N: NL200 3. 19” RACK MOUMTED ATE AND OEM UP TO 2.4 KW Up to six power units can be assembled into a 19”, 3U rack, kit P/N: NL100. In cases where the entire rack is not occupied with power units, P/N: NL101 blank panels can be installed. P/N: NL100 9 0.5 + 350.0 350 +1.0. 153 132.5 57.1 +0.5 148.0 Europe / North America Asia / Far East / Middle East NORTH AMERICA JAPAN Lambda Americas, Inc. Densei Lambda KK, 3055 Del Sol Boulevard 5F Dempa Bldg, 1-11-15 Higashigotanda, San Diego, CA 92154 Shinagawa-Ku, Tokyo 141-0022, Japan Tel: +1-800-LAMBDA-4 Tel: +81 3 3447 4693 Tel: +1-619-575-4400 Fax: +81 3 3447 4750 Fax: +1-619-429-1011 www.densei-lambda.com www.lambdapower.com CHINA Lambda Americas, Inc. 405 Essex Rd. Neptune, NJ 07753 Shanghai Office of Wuxi Nemic-Lambda Electronic Co. Ltd. Tel: +1-732-922-9300 Fax: +1-732-922-1441 4F 2008 Hongmei Bldg, Hongmei Road, www.lambda-hp.com Cao He Jing Hi-Tech Park, ZER 20 O-UP 0W/400W/800W Shanghai, China 200233 UK Tal: +86-21-6485-0777 Fax: +86-21-6485-0666 Programmable DC Power Supplies Lambda UK Densei-Lambda K.K. Beijing Office Kingsley Avenue Ilfracombe, Devon Room 818 Office Tower One, Beijing Junefield Plaza, EX 34 8ES United Kingdom Built-in RS-232 & RS-485 Interface No.6 Xuanwumenwai St., Tel: +44-1271-856666 Fax: +44-1271-864894 Xuanwu District, Beijing P.R.CHINA 100052 E-mail: powersolutions@lambda-europe.com with IEEE488 (GPIB) optional. Tel: +86-10-6310-4872 Fax: +86-10-6310-4874 www.lambda-gb.com www.densei-lambda.com.cn FRANCE Constant Voltage/Constant Current HONG KONG Lambda SAS, Built-in RS-232 & RS-485 Interface ZAC des Delaches Densei Lambda Hong Kong Branch BP 1077 - Gometz le Chatel An embedded Microprocessor controller Room. 8, 27/F, Mega Trade Center 91940 LES ULIS 1 Mei Wan St. Tsuen Wan, N.T. Hong Kong Digital Encoder Knob Tel: +33 1 60 12 71 65 Tel: +852-2420-6693 Fax: +852-2420-3362 Fax: +33 1 60 12 71 66 www.densei-lambda.com Software Calibration www.lambda-f.com Last Setting Memory KOREA GERMANY Parallel Operation (Master/Slave) Active Current Sharing Densei Lambda K.K. Korea Branch Lambda GmbH 6F Songok Bldg. 4-1 Soonae-Dong External Voltage or Resistance Programming Karl-Bold-Str.40, Pundang-Gu, Songnam-Shi Kyonggi-Do, 463-020 Korea Voltage up to 120V, Current up to 132A D-77855 Achern, Germany Tel: +82-2-556-1171 Fax: +82-2-555-2706 Tel: +49-7841-666-0 Fax: +49-7841-500-0 www.densei-lambda.co.kr Active Power Factor Correction: 99% E-mail: info.germany@lambda-europe.com 85~265Vac Universal Input Voltage www.lambda-germany.com MALAYSIA 19" Rack Mounted ATE and OEM AUSTRIA Nemic-Lambda (M) SDN. BHD. No.7.3, 7th Floor, Jaya Shopping Center, Worldwide Safety Agency Approvals Lambda GmbH Jalan Semangat Section 14, 46100 Aredstrasse 22, CE Mark for LVD and EMC Regulation Petaling Jaya Selangor, D.E, Malaysia A - 2544 Leobersdorf, Austria Tel: +60-3-7957-8800 Fax: +60-3-7958-2400 Tel: +43 - 2256 - 655 84 Fax: +43 - 2256 - 645 12 www.densei-lambda.com E-mail: info.germany@lambda-europe.com www.lambda-austria.com SINGAPORE C US ITALY Nemic-Lambda (S) PTE Ltd. LISTED .. geprufte .. Blk 1008 Toa Payoh North # 06-01/08 Sicherheit TESTING EQUIPMENT TUV Rheinland Lambda S.r.l. 65SA Singapore 318996 Via dei Lavoratori 128/130 Tel: +65-6251-7211 Fax: +65-6250-9171 IT 20092 Cinisello Balsamo (MI) www.densei-lambda.com Tel: +39-02-6129-3863 Fax: +39-02-6129-0900 www.lambda-italy.com ISRAEL SCANDINAVIA Nemic Lambda Ltd. Sales Office: Lambda Scandinavia Kibbutz Givat Hashlosha Tel-Aviv 48800, Israel Rallarvägen 41 Tel: +972-3-9024-333 Fax: +972-3-9024-777 SE-184 40 Akersberga Plant: Sweden POB 500 Karmiel Industrial Zone 20101, Israel Tel: +46 854 084 990 Tel: +972-4-9887-491 Fax: +972- 4-9583-347 Fax: +46 854 066 096 E-mail: info@nemic.co.il E-mail: info@lambda-scandinavia.com www.nemic.co.il www.lambda-scandinavia.com ZERO-UP 200W/400W/800W UP Programmable DC Power Supplies Control Flexibility for Worldwide Applications AD0807-B