PIN Silicon Photodiode OP905, OP906 OP905 OP906 Features: • Clear epoxy package • Linear response vs. irradiance • Fast switching � me • Narrow receiving angle • T-1package style • Small package style ideal for space-limited applica� ons Description: Each OP905 and OP906 device consists of a PIN silicon photodiode molded in a clear epoxy package that allows spectral response from visible to infrared light wavelengths. The T-1 package style is ideal for space-limited applica� ons. Both devices have a narrow receiving angle, which provides excellent on-axis coupling. Both are also 100% produc� on tested using infrared light for close correla� on with OPTEK’s GaAs and GaAiAs emi� ers. Please refer to ApplicaƟon BulleƟns 208 and 210 for addiƟonal design informaƟon and reliability (degradaƟon) data. Ordering InformaƟon Applications: Part Number Sensor Viewing Angle Lead Length • Non-contact reţec� ve object sensor OP905 Photodiode 95° 0.50" • Assembly line automa� on OP906 • Machine automa� on • Machine safety OP905 • End of travel sensor • Door sensor OP905 - OP906 1 2 [MILLIMETERS] DIMENSIONS ARE IN: Pin # Diode INCHES 1 Anode 2 Cathode OP906 CONTAINS POLYSULFONE To avoid stress cracking, we suggest using ND Industries’ Vibra-Tite for thread-locking. Vibra-Tite evaporates fast without causing structural failure in OPTEK'S molded plas� cs. [MILLIMETERS] DIMENSIONS ARE IN: RoHS INCHES General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 1 © TT electronics plc PIN Silicon Photodiode OP905, OP906 Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Reverse Breakdown Voltage 60 V Storage & Opera� ng Temperature Range -40° C to +100° C (1) Lead Soldering Temperature [1/16 inch (1.6mm) from the case for 5 sec. with soldering iron] 260° C Reverse Breakdown Voltage 60 V (2) Power Dissipa� on 100 mW Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Reverse Light Current 2 (3) I OP905 14 - 32 µA V = 5 V, E = 0.50 mW/cm L R E OP906 16 - 35 (4) I Reverse Dark Current - 1 60 nA V = 30 V, E = 0 D R E V Reverse Breakdown Voltage 60 - - V (BR) I = 100 μA R V Forward Voltage - - 1.2 V I = 1 mA F F C Total Capacitance - 4 - pF V = 20 V, E = 0, f = 1.0 MHz T R E t Rise Time - 5 - r ns V = 20 V, λ = 850 nm, R = 50 Ω R L t Fall Time - 5 - f Notes: (1) RMA ţux is recommended. Dura� on can be extended to 10 seconds maximum when ţow soldering. A maximum of 20 grams force may be applied to leads when soldering. (2) Derate linearly 1.67 mW/° C above 25° C. (3) Light source is an unŢltered GaAs LED with a peak emission wavelength of 935 nm and a radiometric intensity level which varies less than 10% over the en� re lens surface of the photodiode being tested. (0.042T -1.5) (4) Calculate the typical dark current in nA using the formula I = 10 where T is ambient temperature in °C. D A A General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 2 © TT electronics plc PIN Silicon Photodiode OP905, OP906 Performance OP905 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 3 © TT electronics plc PIN Silicon Photodiode OP905, OP906 Performance OP906 General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 4 © TT electronics plc