TT ELECTRONICS OP913SL
Specifications
Manufacturer
TT electronics
Manufacturers Part #
OP913SL
Lead Time
10 Week Lead Time
Industry Aliases
OP913SL
Sub-Category
Photodiodes
Brand
Optek Technology
Packaging
Bulk
Factory Pack Quantity
250
Datasheet
Extracted Text
PIN Silicon Photodiode OP913 Series OP913SL OP913WSL Features: • TO-05 herme� cally sealed package • Linear response vs. irradiance • Fast switching � me • Narrow receiving angle • Enhanced temperature range Description: OP913SL and OP913WSL consist of a PIN silicon photodiode mounted in a two-leaded TO-05 herme� cally sealed package. OP913SL has a dome lens with an acceptance angle of 10° when measured from the op� cal axis to the half power point. OP913WSL has a ţat lens with an acceptance half angle of 30°. This large ac� ve area allows very low light level detec� on. Please refer to Applica� on Bulle� ns 208 and 210 for addi� onal design informa� on and reliability (degrada� on) data. Applications: Ordering Information Part Number Sensor Viewing Angle Lead Length • Non-contact reţec� ve object sensor OP913SL 20° • Assembly line automa� on Photodiode 0.50” OP913WSL 80° • Machine automa� on • Machine safety • End of travel sensor OP913SL, OP913WSL • Door sensor OP913SL, OP913WSL 1 2 Pin# Sensor 1 Cathode 2 Anode [MILLIMETERS] DIMENSIONS ARE IN: INCHES RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 1 © TT electronics plc PIN Silicon Photodiode OP913 Series Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage Temperature Range -65°C to +150°C Operating Temperature Range -65°C to +125°C Reverse Voltage 32 V (1) Lead Soldering Temperature [ 1/16 inch (1.6 mm) from the case for 5 seconds with soldering 260°C iron] (2) Power Dissipation 150 mW Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS Reverse Light Current: 120 - - 2 (3)(4) I OP913SL μA V = 5 V, E = 5 mW/cm L R E 40 - - OP913WSL (3) I Reverse Dark Current - - 25 nA V = 10 V, E = 0 D R E Open Circuit Voltage: 2(4) V OP913SL - 400 - mW E = 5 mW/cm CC E OP913WSL - 300 - Short Circuit Current: 2(4) I OP913SL 120 - - V SC E = 5 mW/cm E OP913WSL 40 - - V Reverse Breakdown Voltage 32 - - V E = 100 µA BR E C Total Capacitance - - 150 pF T V = 0, E = 0, F = 1 MHz R E t t Turn On / Turn Off Time - 50 - ns V = 10 V, R = 1 kΩ ON, OFF R L Notes: (1) RMA ţux is recommended. Dura� on can be extended to a maximum of 10 seconds when ţow soldering. (2) Derate linearly 1.5 mW/° C above 25° C. (3) Junc� on temperature for all devices in this data sheet is maintained at 25° C. (4) Light source is an unŢltered tungsten bulb opera� ng at CT = 2870 K or equivalent infrared source. (5) At any par� cular wavelength the ţux responsively, Rθ is related to quantum efficiency by: Rθ = ηq (λ/1240), where ηq is the quantum efficiency in electrons per photon and λ is the wavelength in nanometers; thus at 900 nm, 0.60 A/W corresponds to a quantum efficiency of 83%. (6) NEP is the radiant ţux at a speciŢed wavelength, required for unity signal-to-noise ra� o normalized for bandwidth. NEP calcula� on is made using responsivity at peak sensi� vity wavelength, with spot noise measurement at 1000 Hz in a noise bandwidth of 6 Hz. (λ, f, ∆ f) = (λp, 1000 Hz, 6 Hz). General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 2 © TT electronics plc PIN Silicon Photodiode OP913 Series Performance OP913SL, OP913WSL General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue A 08/2016 Page 3 © TT electronics plc
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the OP913SL?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods