Fiber Optic Detector OPF472 Features: • High speed, low capacitance ® • Popular ST style receptacle • Pre-tested with Ţber to assure performance • Component pre-mounted and ready to use • 35MHz opera� on minimum Description: The OPF472 is a low noise silicon PIN photodiode mounted in a low cost package for Ţber op� c applica� ons. It offers fast response at moderate bias and is compa� ble with LED and laser diode sources in the 800-1000 nm wavelength region. Low capacitance improves signal to noise performance in typical short haul LAN applica� ons. The OPF472 is designed to be compa� ble with mul� mode op� cal Ţbers from 50/125 to 200/300 microns. Applications: • Industrial Ethernet equipment • Copper –to-fiber media conversion • Intra-system fiber optic links • Video surveillance systems [MILLIMETERS] DIMENSIONS ARE IN: ® INCHES ST is a registered trademark of AT&T. RoHS General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue C 08/2016 Page 1 © TT electronics plc Fiber Optic Detector OPF472 Electrical Specifications Absolute Maximum Ratings (T = 25° C unless otherwise noted) A Storage Temperature Range -55° C to +100° C Opera� ng Temperature Range -40° C to +85° C (1) Lead Soldering Temperature 260° C (2) Con� nuous Power Dissipa� on 200 mW Maximum Reverse Voltage 100 VDC Electrical Characteristics (T = 25° C unless otherwise noted) A SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS R Responsivity 0.45 0.55 A/W V = 5.0V; 50/125µm Ţber; λ = 850nm R I Dark Current 0.1 5.0 nA V = 5.0V D R λ Peak Response Wavelength 905 nm p t Output Rise Time 6.0 ns V = 15V; R = 50W, 10%-90% r R L C Total Capacitance 3.0 pF V = 20V T R Notes: 1. Maximum of 5 seconds with soldering iron. Dura� on can be extended to 10 seconds when ţow soldering. RMA ţux is recommended. 2. De-rate linearly at 2.67mW/°C above 25°C . General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue C 08/2016 Page 2 © TT electronics plc Fiber Optic Detector OPF472 Performance General Note OPTEK Technology, Inc. TT Electronics reserves the right to make changes in product specification without 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 notice or liability. All information is subject to TT Electronics’ own data and is www.optekinc.com | www.ttelectronics.com considered accurate at time of going to print. Issue C 08/2016 Page 3 © TT electronics plc