Effective August 2017 Technical Data 0402-MLP Supersedes March 2007 0402ESDA-MLP ESD suppressor Applications • ESD port protection for mobile/smart phones • Game console ESD port protection • High speed ESD data port protection • Set-top-boxes • Tablets, notebooks, netbooks, laptops • High definition television (HDTV) • Media players • Digital cameras • Medical equipment Surface Mount Device • Computers and peripherals ESD port protection • Consumer electronics Product features Ordering Information • Ultra-low capacitance (0.05 pF typ.) ideal for high Catalog Number Packaging speed data applications 10,000 pieces in paper tape on • Provides ESD protection with fast response time 0402ESDA-MLP7 7" (178mm) reel (<1 ns) allowing equipment to pass IEC 61000-4-2 level 4 test 2,500 pieces in paper tape on 0402ESDA-MLP8 • Single-line, bi-directional device for placement 7" (178mm) reel flexibility • Low profile 0402/1005 design for board space savings • Low leakage current (<0.1 nA typ.) reduces power consumption Electrical Characteristics Notes: Characteristic Value 1. Per IEC61000-4-2, Level 4 waveform (8 kV direct, 30 A) measured 30ns after initiation of pulse. Rated Voltage 30 VDC maximum 2. Trigger measurement made using Transmission Line Pulse (TLP) method. 1 Clamping Voltage 35 V typical 3. Minor shifting in characteristics may be observed over 2 multiple ESD pulses at very rapid rate. Trigger Voltage 300 V typical Capacitance (@1 MHz) 0.05 pF typ., 0.15 pF max. Attenuation Change (0-6 GHz) -0.2 dB typical Leakage Current (@12 VDC) <0.1 nA typical ESD Capability IEC61000-4-2 Direct Discharge 8 kV typical IEC61000-4-2 Air Discharge 15 kV typical 1 ESD Pulse Withstand >1000 typical Discontinued effective June 1, 2010 or until inventory is depeleted. Recommended replacement is 0402ESDA-MLP1 data sheet #4367 0402ESDA-MLP Technical Data 0402-MLP ESD suppressor Effective August 2017 Product Dimensions: mm [inches] Solder Pad Recommendation: mm [inches] 2.20 0.70 0.40 Design Considerations The location in the circuit for the MLP family has to be carefully determined. For better performance, the device should be placed as close to the signal input as possible and ahead of any other component. Due to the high current associated with an ESD event, it is recommended to use a “0-stub” pad design (pad directly on the signal/data line and second pad directly on common ground). Environmental Specifications: • Load Humidity: 12VDC per EIA/IS-772 Para. 4.4.2, +85°C, 85% RH for 1000 hours • Thermal Shock: EIA/IS-722 Para 4.6, Air to Air -55°C to +125°C, 5 cycles • Moisture Resistance Test: MIL-STD-202G Method 106G, 10 cycles • Mechanical Shock: EIA/IS-722 Para. 4.9 • Vibration: EIA/IS-722 Para. 4.10 • Resistance to Solvent: EIA/IS-722 Para. 4.11 • Operating & Storage Temperature Range: -55°C to +125°C Soldering Recommendations • Compatible with lead and lead-free solder reflow processes • Peak reflow temperatures and durations: • IR Reflow = 260°C max for 10 sec. max. • Wave Solder = 260°C max. for 10 sec. max. • Recommended IR Reflow Profile: Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 0402-MLP BU- of their respective owners. SB09615 August 2017 Discontinued effective June 1, 2010 or until inventory is depeleted. Recommended replacement is 0402ESDA-MLP1 data sheet #4367