Effective May 2017 Technical Data DS41206 Supersedes August 2006 41206ESDA ESD suppressor four-channel Device application ESDA family are applicable to most signal line circuits. It is applied in a shunt-connected manner. They are not suitable for use on lines where lighting or load-switching transients are present. ESDA family is ideal for use in computers and computer-related equip-ment, such as modems, keyboards, and printers. ESDA family is also well suited for portable electronic equipment such as mobile telephones, test equipment, and card scanners. Processing recommendations Product features ESDA family currently have a convex profile on the top surface of the part. This profile is a result of the construction of the device. • The best ESD protection for high frequency, low They can be processed using standard pick – and – place voltage applications. equipment. The placement and processing techniques for ESDA • Protects up to 4 separate lines with one device family are similar to those used for chip resistors and chip • Exceeds testing requirements outlined in IEC capacitors. 61000-4-2 The Location in the circuit for the ESDA family has to be carefully • Extremely low capacitance determined. For the better performance of the device, the device • Very low leakage current should be positioned as close to the signal input as possible and • Fast response time ahead of any other component. • Bi-directional • Surface mount • Solder termination Part Numbering • RoHS compliant 41206 ESD A -TR1 Device Packaging Options Conguration Device marking -TR1 = (standard) 5,000 pcs, tape-and-reel -SP1 = (samples) 10 pcs on tape, in bag ESDA devices are marked on the tape and reel PolySurg™ Device packages, not individually. Since the product is bi- Device Characteristics Designator directional and symmetrical, no orientation marking is A = Standard required. Note: Spacing in part number is shown for clarity only. Device part number contains no spaces (e.g.41206ESDA-TR1) Part Ratings and Characteristics: Notes: Performance Characteristics Units Min Typ Max 1. The product is 100% tested for 30V operating voltage at 25°C. Continuous operation with higher than 12VDC under extreme 1 temperature and humidity may cause increasing leakage cur- Continuous operating voltage VDC - 12 - rent and/or shifting device resistance. However, even under 3 Clamping voltage V - 35 60 severe environmental test, characteristics of the device did not change up to 12VDC operation. 4 Trigger voltage V 150 300 2. Some shifting in characteristics may occur when tested over 5 several hundred ESD pulses at very rapid rate of 1 pulse per ESD Threat voltage capability kV - 8 15 second or faster. Capacitance (@ 1 KHz ~ 1.8GHz) pF - 0.15 1 3. Per IEC 61000-4-2, 30A @ 8kV, level 4, clamp measurement made 30 ns after initiation of pulse, all tests in contact dis- Leakage current (@ 12 VDC) nA 100 charge mode. 3 4. Trigger measurement made using Transmission Line Pulse Peak current A - 30 45 (TLP) method. Operating temperature °C -40 +25 +105 5. PolySurg™ devices are capable of withstanding up to a 15 kV, 45A ESD pulse. Device ratings are given at 8kV per Note 1, 3 2 ESD pulse withstand # pulses 20 >500 - unless otherwise specied. 41206ESDA Technical Data DS41206 Effective May 2017 ESD suppressor four-channel Environmental Specifications: • Moisture Resistance: MIL-STD-883, Method 1004.7, 85°C, 85%R.H., 240 hrs. • Thermal shock: MIL-STD-202, Method 107G, -65°C to 125°C, 30 min. cycle, 5 cycles • Vibration: MIL-STD-202F, Method 201A,(10 to 55 to 10 Hz, 1 min. cycle, 2 hrs each in X-Y-Z) • Chemical resistance: ASTM D-543, 24 hrs @ 50°C, 3 solutions (H2O, detergent solution, deuxer) • Full load voltage: Up to 24 VDC, 1000 hrs, 25°C • Solder leach resistance and terminal adhesion: Per EIA-576 • Solderability: MIL-STD-202, Method 208 (95% coverage) Product Dimension E F W Recommended Solder Bottom View Pad Outline (per IPC-SM-782) L 0.5 X H (.020) A 0.8 B C D I (.031) 0.7 EIA Size L W H A B (.028) 41206 3.2 ± 0.2 1.6 ± 0.2 0.8 max 0.38 ± 0.5 0.2 min, 0.4 typ mm(inch) (.126 ± .008) (.063 ± .008) (.032 max) (.015 ± .002) (.008 min, .16 Typ) C D E F I X 0.4 Typ 0.2 ± 0.1 0.2 Typ 0.38 ± 0.10 0.80 ± 0.02 0.45 ± 0.02 0.8 (.031) (.016 Typ) (.008 ± .004) (.008 Typ) (.015 ± .004) (.03 ± .0008) (.017 ± .0008) Tape-and-Reel Specification 4.0±0.1 mm (inches) (.157±.004) 2.0±0.05 B (.079±.002) 1.0±0.2 3.5±0.05 (.040±.008) (.138±.002) A 8.0±0.2 (.315±.008) 60.0±1.0 1.75±0.1 2.0 (2.362±.040) 4.0±0.1 (.059±.004) (.080) 1.5+0.1/-0 (.157±.004) (.056+.004/-0) 178.0±2.0 20.5 (7.008±.080) (.807) Dimension 41206 3.5+0.2 A (.138+.008) 13.0±0.5 10.0±1.5 (.512±.020) 1.9+0.2 (.394±.059) B (.075+.008) www.eaton.com/electronics 2 41206ESDA Technical Data DS41206 ESD suppressor four-channel Effective May 2017 Typical Applications Data Bus Supply Voltage In from To Peripheral Logic Device Circuitry Normal Normal Current Current 41206ESDA IC Device (2) Chip Out to From Peripheral Logic Device Circuitry Current Flow Under Surge Conditions USB Controller USB Controller Receiver Driver V+ Data (+) Data (-) V+ Data (+) Data (-) 41206ESDA 41206ESDA Device (2) Device USB USB Port Port RS-232 Port Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. DS41206 of their respective owners. May 2017 Signal Line in