Effective May 2017 Technical Data 4419 Supersedes June 2012 HALOGEN 0603ESDA2-TR2 HF Pb ESD suppressor FREE Applications • PDAs • Computers and peripherals • Digital camcorders • Blu-Ray/DVD players • DSL Modems • Satellite and HD radio • HDTV Equipment • Set top Boxes • A/V Equipment • High speed data ports • Cell phones o USB 2.0/3.0 • Digital still cameras o High speed Ethernet • MP3 / Multimedia players o Infiniband® • External storage o IEEE 1394 • GPS o DVI o HDMI Surface Mount Device Part Numbering System: 0603 ESDA 2 TR2 Product features Package size Product family • Lead free, halogen free materials • 0603/1608 footprint surface mount device Second generation designator • Ideal ESD protection for high frequency, low Packaging code voltage applications Packaging Code • Exceeds testing requirements of IEC 61000-4-2 • Ultra low capacitance (0.15pF maximum) Package Code Sux Description • Very low leakage current 5000 pieces in paper tape on 7 inch diameter -TR2 • Fast response time (178mm) reel per EIA Standard 481 • Bi-directional Device marking 603ESDA2-TR2 ESD Suppressors are marked on the tape and reel Specifications packages, not individually. Since the product is bi-directional and Performance Characteristics Units Min Typ Max symmetrical, no orientation marking is required. Continuous Operating Voltage Vdc - - 14 30 1 Clamping Voltage V - - 35 60 2 Design considerations Trigger Voltage V - - 350 - - ESD Threat Voltage Capability kv - - 8 15 The location in the circuit for the 0603ESDA2-TR2 family has to Capacitance (@ 1MHz) pF - - 0.10 0.15 Leakage Current (@ 12Vdc) nA - - <0.1 100 be carefully determined. For better performance, the device Peak Current A - - 30 Typ. 45 should be placed as close to the signal input as possible and Operating Temperature °C -55 +25 +105 ahead of any other component. Due to the high current ESD Pulse Withstand # Pulses 20 >500 - - associated with an ESD event, it is recommended to use a “0- 1. Per IEC 61000-4-2, 30A @ 8kV, Level 4, contact discharge, measurement made stub” pad design (pad directly on the signal/data line and 30ns after initiation of pulse. second pad directly on common ground). 2. Trigger measurement made using Transmission Line Pulse (TLP) method. Processing recommendations The 0603ESDA2-TR2 family currently has a convex profile on the top surface of the part. This profile is a result of the construction of the device. They can be processed using standard pick-and- place equipment. The placement and processing techniques for these devices are similar to those used for chip resistors and chip capacitors. 0603ESDA2-TR2 Technical Data 4419 Effective May 2017 ESD suppressor Dimensions - mm (in) Recommended Pad Layout - in (mm) (per IPC-SM-782 ) T H 0.60 min (0.023 min) L 1.1 ref W (0.043 ref) 1.0 max EIA Size L W H T (0.039 max) 1.60±0.15 0.80±0.10 0.60±0.10 0.31±0.21 0603ESDA (0.063±0.006) (0.031±0.004) (0.024±0.004) (0.012±0.008) Packaging 5000 pieces in paper tape on 7 inch diameter (178mm) reel per EIA Standard 481. Tape and Reel Specifications - mm (in) www.eaton.com/electronics 2 0603ESDA2-TR2 Technical Data 4419 ESD suppressor Effective May 2017 Environmental Specifications: Soldering Recommendations Coating bond strength: ASTM D3359-83, Method A, Section 6. Compatible with lead and lead-free solder reflow processes Note: the device coating is not scored. Peak temperatures and durations: Chemical resistance: ASTM D-543, 4 hrs @ 40°C, 3 solutions (H O, 2 - IR Reflow = 260°C max for 30 sec. max. Capable of 3X reflow. detergent solution, defluxer). - Wave Solder = 260°C max. for 10 sec. max. Humidity(steady state): MIL-STD-883, method 1004.7, 85% RH, 85°C, - Hand Soldering = 350°C max. for 5 sec. max. 240 hrs. Recommended IR Reflow Profile Thermal shock: MIL-STD-202F, method 107G, -65°C to 125°C, 30 > Supplier T T p- c User T < T min, 5 cycles. p- c T cVibration: MIL-STD-202F,method 201A,(10 to 55 to 10Hz, 1 minute T -5°C c Supplier t User t cycle, 2 hrs. each in X-Y-Z axis). p p Solder leach resistance and terminal adhesion per EIA-567. T pSolderability per MIL-STD-202, Method 208 (95% coverage). T -5°C c t p Max. Ramp Up Rate = 3°C/s Max. Ramp Down Rate = 6°C/s Full load voltage: 14.4Vdc, 1000hrs., 25°C. T L tOperating temperature characteristics: Electrical testing at T smax Preheat Area +105°C and -55°C. Tsmin t s 25 Time 25°C to Peak Time Profile Feature Sn-Pb Eutectic Assembly Pb-Free Assembly Preheat & Soak Temperature min (T ) 100°C 150°C smin Temperature max (T ) 150°C 200°C smax Time (T to T ) (t ) 60-120 seconds 60-120 seconds smin sma s x Average ramp-up rate (T to T ) 3°C/second max. 3°C/second max. smax p Liquidous temperature (T ) 183°C 217°C L Time at liquidous (t ) 60-150 seconds 60-150 seconds L See classification temp See classification temp Peak package body temperature (Tp)* in Table 4.1 in Table 4.2 Time (t )** within 5°C of the specified 20** seconds 30** seconds p classification temperature (T ) c Average ramp-down rate (T to T ) 6°C/second max. 6°C/second max. p smax Time 25°C to peak temperature 6 minutes max. 8 minutes max. * Tolerance for peak profile temperature (T ) is defined as a supplier minimum and a user maximum. p ** Tolerance for time at peak profile temperature (t ) is defined as a supplier minimum and a user maximum. p Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA Publication No. 4419 BU-SB12433 All other trademarks are property May 2017 of their respective owners. Temperature