Effective May 2017 Technical Data 4378 Supersedes August 2010 HALOGEN 42510ESDA-TR1 HF Pb ESD suppressor four-channel FREE Design considerations • Follow the soldering recommendations to avoid deforming product • Do not use high temperature, high humidity or corrosive atmospheres (sulfide and chloride gas) that could damage the solderability • Moisture Sensitivity Level (MSL) according to J-STD-020 standard: Level 2 (Floor Life 1 year under <30°C/65%RH Surface Mount Device conditions) Solderability requirement according to IPC/JEDEC J- STD-002C, Test D, Test B1 • Use Sn/Ag/Cu (96.5/3.0/0.5) or equivalent solder and activated Product features flux #5 or equivalent. • Halogen free, lead free and RoHS compliant for global applications Part Numbering System: 4 2510 ESDA- TR1 • Ultra-low capacitance (0.1pF typical) ideally suited Four channel SIN 1 chip for protecting high speed data applications 2.5x1.0mm footprint size • Provides ESD protection with fast response time ESDA ESD Suppressor (<1ns) allowing equipment to pass the IEC 61000-4-2 Level 4 test Tape and reel packaging code • Four (4) channel array • Zero signal distortion Ordering • Low leakage current (<0.01µA typical) Part Number Description Applications 42510ESDA-TR1 5000 suppressors in paper tape on a 7 inch • Digital video equipment (178 mm) reel • Mobile phone • GPS Antenna Environmental Specifications • Bluetooth communication equipment antenna circuit Characteristic Value • IEEE-1394 Load Humidity +85 °C/90% RH with rated voltage for 1000 hrs • DVI Thermal Shock -40 °C to +85 °C, 30 minute cycle, 5 cycles • HDMI J-STD-020 Standard: Level 2 Moisture Resistance Test (1 year floor life under 30 °C/65% RH conditions Operating Temperature Range -40 °C to +85 °C (-40 °F to 185 °F) Storage Temperature Range -55 °C to +125 °C (-67 °F to +257 °F) Characteristic Value/Range Rated Voltage (max) 12 V Leakage Current (max @ 12Vdc) 0.01 µA Trigger Voltage (V ) 300 V Typical t Clamping Voltage (V ) 30 V Typical c Capacitance (Cp) @1MHz* 0.1 pF Typical Response Time <1 ns ESD Voltage Capability, IEC 61000-4-2 8 kV Contact Discharge Mode ESD Voltage Capability, IEC 61000-4-2 15 kV Air Discharge Mode ESD Withstand Pulses 100 Times Minimal * Note, Capacitance measured with 1 Vrms 42510ESDA-TR1 Technical Data 4378 Effective May 2017 ESD suppressor four-channel Dimensions - mm Recommended Pad Layout - mm W B L T E D C B C D E L T W 0.2 0.3 0.2 0.5 2.5 0.5 1.0 ±0.1 ±0.05 ±0.05 ±0.05 ±0.1 ±0.1 ±0.1 GP P X X Y Y Z 1 1 1 0.2 0.5 1 0.2 0.3 0.6 1.4 1.4 Note: Print solder 0.01~0.015mm thick. Packaging-mm Soldering recommendations Supplied in tape and reel packaging, 5000 parts per seven inch • Compatible with lead and lead-free solder reflow (178 mm) reel per EIA Standard 481-1 processes ( ) • Hand soldering - soldering tip should not directly touch part +280 °C max for 3 sec. max • Peak reflow temperatures and durations: : ' o IR Reflow = 260°C max for 20 sec. max o Wave Solder = 260°C max for 10 sec. max Recommended IR Reflow Profile 7RS7DSH Unit: mm A B C D E F L W 8.00 3.50 1.75 2.00 4.00 1.50 2.90 1.40 ±0.30 ±0.05 ±0.10 ±0.05 ±0.10 ±0.10 ±0.20 ±0.20 Circuit Schematic HDMI Application Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice, any technical information contained in this bulletin. Eaton Electronics Division 1000 Eaton Boulevard Cleveland, OH 44122 United States www.eaton.com/electronics © 2017 Eaton Eaton is a registered trademark. All Rights Reserved Printed in USA All other trademarks are property Publication No. 4378 BU-SB10816 of their respective owners. May 2017 / % & $